IEEE

The Transistor and Portable Electronics

SHARE |

From GHN

(Difference between revisions)
Jump to: navigation, search
(New page: == The Transistor and Portable Electronics<br> == The Transistor and Portable Electronics Image:Armstrongradiobeach.jpg <br>In 1923 Edwin Armstrong and his wife spent a day at ...)
 
(36 intermediate revisions by 9 users not shown)
Line 1: Line 1:
== The Transistor and Portable Electronics<br> ==
+
== The Transistor and Portable Electronics ==
  
 +
[[Image:Replica-of-first-transistor.jpg|thumb|right|In 1997 Lucent Technologies created this replica to commemorate the 50th anniversary of the invention of the point contact transistor at Bell Labs in December 1947. Source: clinton4.nara.gov/media/jpg/replica-of-first-transistor.jpg]]
  
 +
[[Image:1958 Sony transistor.jpg|thumb|right|1958 transistor radio. Courtesy Sony Corporation]]
  
The Transistor and Portable Electronics
+
[[Image:The Transistor and Portable Electronics.jpg|thumb|right|Howard Armstrong's Portable Radio]]
  
 +
[[Image:Walkman.jpg|thumb|right]]
  
 +
At Bell Laboratories in Murray Hill, NJ, John Bardeen, Walter Brattain, and William Shockley invented the transistor. It was [[Bell Demonstrates Transistor|demonstrated]] for the first time on 23 December 1947. Many consider the [[Transistors|transistor]] to be one of the most important inventions in 20th century technology. The story of the first working transistor underscores the power modern industrial laboratories have had to coordinate scientific discovery in the pursuit of technological breakthroughs. It is about great intellectual leaps and driving ambition. However, only a few scholars know that the pursuit of the solid-state amplifier has an even longer history than the transistor. This quest dates back to 1924–1925, and the work of Julius Edgar Lilienfeld.&nbsp;
  
 +
Though [[Karl Braun|Karl Braun’s]] cathode ray tube (1897) and Ambrose Fleming’s vacuum tube rectifier (1904) marked the beginning of the electronics age, Le[[Lee De Forest|e de Forest’s]] triode actually propelled electronics forward. By placing a wire “grid” between the cathode and anode, de Forest transformed Fleming’s rectifier into an amplifier. With amplification, radio communications blossomed and long-distance telephony became a reality.&nbsp;
  
 +
The very success of the triode, however, brought out its long-term limitations. It was a fragile device that consumed a lot of power. And so in the mid-1920s, with an eye on radio technology, Julius Edgar Lilienfeld set out to find a solid-state replacement for the thermionic triode.
  
[[Image:Armstrongradiobeach.jpg]] <br>In 1923 Edwin Armstrong and his wife spent a day at the beach with the world's first “portable radio.” Believe it or not, in the pre-transistor world, this radio was considered portable.  
+
In patent applications to Canada in 1925 and to the United States in 1926, Lilienfeld claimed that his solid-state amplifier “relates to a method of and apparatus for controlling the flow of an electrical current between two terminals of an electrically conducting solid by establishing a third potential between said terminals.” He filed two more U.S. patent applications in 1928. In his 28 March U.S. patent application, Lilienfeld was more explicit about what he was after: “the provision of a simple, compact and substantial device which withal shall be inexpensive to construct.” Offering an alternative to thermionic principles, Lilienfeld argued that his novel device “[could] be operated under much lower voltage conditions than heretofore.”
  
 +
Prior to the 1947 invention of the transistor, electronics were anything but portable. While people longed to take radios with them on trips, the reality of using large vacuum tubes for sound amplification made it virtually impossible. The transistor, an electronic device for amplifying an electronic signal, began a revolution within the electronic components industry. Their tiny size, reliability, and durability enabled manufacturers to shrink the size of electronics and thereby make electronics truly portable.
  
 +
One of the earliest successes was the transistor radio. Demonstration of what was probably the first transistor radio, by the German firm Intermetall, occurred in August 1953 at the Düsseldorf Radio Fair.&nbsp; And on 18 October 1954 Texas Instruments, in collaboration with IDEA Corporation, announced the first commercial transistor pocket radio, the Regency TR1. Also, in the early 1950s, a representative of the Totsuko Corporation (which was later renamed Sony) traveled to the United States to find out about transistors. The representative walked away convinced of the transistor’s potential.&nbsp; Sony introduced its first transistor radio in 1955. Quickly, dozens of other companies&nbsp; brought&nbsp; transistor radios to the market and the era of low-cost, mass-market, portable consumer electronics had begun.
  
<br>Prior to the 1947 invention of the transistor, “portable” electronics were anything but portable. While people longed to take radios with them on trips, the reality of using large vacuum tubes for sound amplification made it virtually impossible. The transistor, an electronic device for amplifying an electronic signal, began a revolution within the electronic components industry. Their tiny size, reliability, and durability enabled manufacturers to shrink the size of electronics and thereby make electronics truly portable.
+
The ramifications of the transistor radio and portable products were immense. Transistor radios revolutionized the way people listened to music. Radios, which only a decade before were often the size of a piece of furniture, could now be toted around. Away from the eyes and ears of their parents, teenagers could listen to whatever they chose, wherever they chose. They frequently chose [[Rock and Roll and the Recording Studio|rock and roll music]], which itself was just beginning to reach a mainstream audience. The growth of this new music was encouraged by the transistor radio.  
  
One of the earliest successes was the transistor radio. Regency, a small Indianaopilis based firm, introduced the first commercial transistor radio in time for the 1954 holiday season. It was based on a design by the Texas Instruments Corporation, which manufactured most of the electronic components. . Also, in the early 1950s, a representative of the Totsuko Corporation (which was later renamed SONY) traveled to the United States to find out about transistors. The representative walked away convinced of the transistor’s potential.&nbsp; SONY introduced its first transistor radio in 1955. Quickly, dozens of other companies&nbsp; brought&nbsp; transistor radios to the market and the era of low-cost, mass-market, portable consumer electronics had begun.  
+
The&nbsp;appeal of portable products has only escalated since their introduction in the 1950s. Few could live without their iPods, cell phones, PDAs, and pagers. Each of these products contain millions of transistors that are now mapped onto tiny wafers called integrated circuits, or more commonly, chips.  
  
The ramifications of the transistor radio and portable products were immense. Transistor radios revolutionized the way people listened to music. Radios, which only a decade before were often the size of a piece of furniture, could now be toted around. Away from the eyes and ears of their parents, teenagers could listen to whatever they chose, wherever they chose. They frequently chose rock and roll music, which itself was just beginning to reach a mainstream audience. The growth of this new music was encouraged by the transistor radio.
+
[[Category:Business, management & industry|Transistor]] [[Category:Business|Transistor]] [[Category:Culture and society|Transistor]] [[Category:Leisure|Transistor]] [[Category:Components, circuits, devices & systems|Transistor]] [[Category:Solid state circuits|Transistor]] [[Category:Transistors|Transistor]] [[Category:Power, energy & industry application|Transistor]] [[Category:Consumer electronics|Transistor]] [[Category:News|Transistor]]
 
+
[[Image:Walkman.jpg]]<br>The Sony Walkman, introduced in 1979, offers highly portable—and highly private—music. Courtesy: Sony Corporation. <br>The love of portable products has only escalated since their introduction in the 1950s. Few could live without their iPods, cell phones, PDAs, and pagers. Each of these products contain millions of transistors that are now mapped onto tiny wafers called integrated circuits, or more commonly, chips. <br>
+
 
+
 
+
 
+
<br>
+
 
+
<rating comment="false">
+
Well Written?
+
1 (No)
+
2
+
3
+
4
+
5 (Yes)
+
</rating> <rating comment="false">
+
Informative?
+
1 (No)
+
2
+
3
+
4
+
5 (Yes)
+
</rating> <rating comment="false">
+
Accurate?
+
1 (No)
+
2
+
3
+
4
+
5 (Yes)
+
</rating>
+

Revision as of 16:26, 1 March 2012

The Transistor and Portable Electronics

In 1997 Lucent Technologies created this replica to commemorate the 50th anniversary of the invention of the point contact transistor at Bell Labs in December 1947. Source: clinton4.nara.gov/media/jpg/replica-of-first-transistor.jpg
In 1997 Lucent Technologies created this replica to commemorate the 50th anniversary of the invention of the point contact transistor at Bell Labs in December 1947. Source: clinton4.nara.gov/media/jpg/replica-of-first-transistor.jpg
1958 transistor radio. Courtesy Sony Corporation
1958 transistor radio. Courtesy Sony Corporation
Howard Armstrong's Portable Radio
Howard Armstrong's Portable Radio

At Bell Laboratories in Murray Hill, NJ, John Bardeen, Walter Brattain, and William Shockley invented the transistor. It was demonstrated for the first time on 23 December 1947. Many consider the transistor to be one of the most important inventions in 20th century technology. The story of the first working transistor underscores the power modern industrial laboratories have had to coordinate scientific discovery in the pursuit of technological breakthroughs. It is about great intellectual leaps and driving ambition. However, only a few scholars know that the pursuit of the solid-state amplifier has an even longer history than the transistor. This quest dates back to 1924–1925, and the work of Julius Edgar Lilienfeld. 

Though Karl Braun’s cathode ray tube (1897) and Ambrose Fleming’s vacuum tube rectifier (1904) marked the beginning of the electronics age, Lee de Forest’s triode actually propelled electronics forward. By placing a wire “grid” between the cathode and anode, de Forest transformed Fleming’s rectifier into an amplifier. With amplification, radio communications blossomed and long-distance telephony became a reality. 

The very success of the triode, however, brought out its long-term limitations. It was a fragile device that consumed a lot of power. And so in the mid-1920s, with an eye on radio technology, Julius Edgar Lilienfeld set out to find a solid-state replacement for the thermionic triode.

In patent applications to Canada in 1925 and to the United States in 1926, Lilienfeld claimed that his solid-state amplifier “relates to a method of and apparatus for controlling the flow of an electrical current between two terminals of an electrically conducting solid by establishing a third potential between said terminals.” He filed two more U.S. patent applications in 1928. In his 28 March U.S. patent application, Lilienfeld was more explicit about what he was after: “the provision of a simple, compact and substantial device which withal shall be inexpensive to construct.” Offering an alternative to thermionic principles, Lilienfeld argued that his novel device “[could] be operated under much lower voltage conditions than heretofore.”

Prior to the 1947 invention of the transistor, electronics were anything but portable. While people longed to take radios with them on trips, the reality of using large vacuum tubes for sound amplification made it virtually impossible. The transistor, an electronic device for amplifying an electronic signal, began a revolution within the electronic components industry. Their tiny size, reliability, and durability enabled manufacturers to shrink the size of electronics and thereby make electronics truly portable.

One of the earliest successes was the transistor radio. Demonstration of what was probably the first transistor radio, by the German firm Intermetall, occurred in August 1953 at the Düsseldorf Radio Fair.  And on 18 October 1954 Texas Instruments, in collaboration with IDEA Corporation, announced the first commercial transistor pocket radio, the Regency TR1. Also, in the early 1950s, a representative of the Totsuko Corporation (which was later renamed Sony) traveled to the United States to find out about transistors. The representative walked away convinced of the transistor’s potential.  Sony introduced its first transistor radio in 1955. Quickly, dozens of other companies  brought  transistor radios to the market and the era of low-cost, mass-market, portable consumer electronics had begun.

The ramifications of the transistor radio and portable products were immense. Transistor radios revolutionized the way people listened to music. Radios, which only a decade before were often the size of a piece of furniture, could now be toted around. Away from the eyes and ears of their parents, teenagers could listen to whatever they chose, wherever they chose. They frequently chose rock and roll music, which itself was just beginning to reach a mainstream audience. The growth of this new music was encouraged by the transistor radio.

The appeal of portable products has only escalated since their introduction in the 1950s. Few could live without their iPods, cell phones, PDAs, and pagers. Each of these products contain millions of transistors that are now mapped onto tiny wafers called integrated circuits, or more commonly, chips.