IEEE

Presidents of the American Institute of Electrical Engineers (AIEE)

SHARE |

From GHN

(Difference between revisions)
Jump to: navigation, search
(7 intermediate revisions by 2 users not shown)
Line 3: Line 3:
 
<p>[[Image:AIEE Kite Badge 0959.jpg|thumb|right]] </p>
 
<p>[[Image:AIEE Kite Badge 0959.jpg|thumb|right]] </p>
  
<p>[[Norvin Green|Norvin Green]], 1884-86 </p>
+
[[Image:AIEE Presidents 0236.jpg|thumb|right|AIEE presidents, including Steinmetz at center]]
  
<p> Norvin Green became the president of Western Union in 1878. He later was one of the founders of the AIEE in the early 1880s. </p>
+
<p>[[Image:1920s photo past AIEE presidents 1795.jpg|thumb|right|A group of past presidents at the AIEE Chicago Convention, June 29, 1911. Photo appears on page 1773 of the 50th Anniversary special issue of "Electrical Engineering." Back row (l-r) Gano Dunn, Dugald C. Jackson, Louis A. Ferguson, Schulyer S. Wheeler, John W. Lied, and Bion J. Arnold.  Front row (l-r) Francis C. Crocker, T. Commeford Martin, Frank J. Sprague and Charles P. Steinmetz.]] </p>
  
<p>[[Franklin Pope|Franklin L. Pope]], 1886-87 </p>
+
<p>[[Norvin Green|Norvin Green]], 1884-86, became the president of Western Union in 1878.  He later was one of the founders of the AIEE in the early 1880s. </p>
  
<p> Franklin L. Pope was one of America’s first practicing electrical engineers.  In addition to his inventions and patents, which greatly contributed to the field of electrical engineering, he authored several books in the genres of literature, history, and genealogy.  </p>
+
<p>[[Franklin Pope|Franklin L. Pope]], 1886-87, one of America’s first practicing electrical engineers.  In addition to his inventions and patents, which greatly contributed to the field of electrical engineering, he authored several books in the genres of literature, history, and genealogy.  </p>
  
<p>[[T. Commerford Martin|T. Commerford Martin]], 1887-88 </p>
+
<p>[[T. Commerford Martin|T. Commerford Martin]], 1887-88, editor of electrical magazines and an author of various works.  He also worked for the U.S. Census Office from 1900-1915, where he wrote reports about electrical industries and utilities. </p>
  
<p> T. Commerford Martin was an editor of electrical magazines and an authorHe also worked for the U.S. Census Office from 1900-1915, where he wrote reports about electrical industries and utilities. </p>
+
<p>[[Edward Weston|Edward Weston]], 1888-89, improved electrical instruments so that they would be more portable and that their measurements would become more accurateIn 1908, his standard cell became the universal standard of electromotive force. </p>
  
<p>[[Edward Weston|Edward Weston]], 1888-89 </p>
+
<p>[[Elihu Thomson|Elihu Thomson]], 1889-90, his invention of the 3 coil dynamo was the foundation to a successful electric lighting system that he and colleague E. J. Houston produced in 1879 through their company Thomson-Houston Electric Company.  This company merged with Edison General Electric Company in 1892 to form General Electric Company. </p>
  
<p> Edward Weston improved electrical instruments so that they would be more portable and that their measurements would become more accurate.  In 1908, his standard cell became the universal standard of electromotive force. </p>
+
<p>[[William Anthony|William A. Anthony]], 1890-91, professor of physics and mechanics at many U.S. universities.  In addition to teaching, he also contributed articles to many electrical engineering magazines, and was an electric engineer consultant in New York City. </p>
  
<p>[[Elihu Thomson|Elihu Thomson]], 1889-90 </p>
+
<p>[[Alexander Graham Bell|Alexander Graham Bell]], 1891-92, most known for his invention of the telephone in 1876. </p>
  
<p> Elihu Thomson’s invention of the 3 coil dynamo was the foundation to a successful electric lighting system that he and colleague E. J. Houston produced in 1879 through their company Thomson-Houston Electric Company.  This company merged with Edison General Electric Company in 1892 to form General Electric Company. </p>
+
<p>[[Frank J. Sprague|Frank Julian Sprague]], 1892-93, founded the Sprague Electric Railway and Motor Company, which later developed an electric railway system in Richmond, Virginia using electric traction. </p>
  
<p>[[William Anthony|William A. Anthony]], 1890-91 </p>
+
<p>[[Edwin Houston|Edwin J. Houston]], 1893-95, collaborated with Elihu Thomson to create a successful electric lighting system.  In addition to his inventions, Houston was also a university professor, author, and engineering consultant. </p>
  
<p> William A. Anthony was a professor of physics and mechanics at many U.S. universitiesIn addition to teaching, he also contributed articles to many electrical engineering magazines, and was an electric engineer consultant in New York City. </p>
+
<p>[[Louis Duncan|Louis Duncan]], 1895-97, served as an electrical engineering professor at Johns Hopkins University for 14 yearsAfter retiring from his career in academia, Duncan was an engineering consultant for many traction, utility, and railway companies. </p>
  
<p>[[Alexander Graham Bell|Alexander Graham Bell]], 1891-92 </p>
+
<p>[[Francis B. Crocker|Francis B. Crocker]], 1897-98, pioneered the design for commercially successful motors.  Crocker also supported the national and international standardization of electrical equipment. </p>
  
<p> Alexander Graham Bell is most known for his invention of the telephone in 1876. </p>
+
<p>[[Arthur E. Kennelly|Arthur E. Kennelly]], 1898-1900, co-founded the Heaviside-Kennelly layer in the ionosphere with Oliver Heaviside in 1901, which contributed to the study of radio waves. </p>
  
<p>[[Frank J. Sprague|Frank Julian Sprague]], 1892-93 </p>
+
[[Carl Hering|Carl Hering]], 1900-01, an electrical engineer who researched storage batteries, designed and improved the electric furnace, and made discoveries regarding electromagnetic force.  Hering also published works about mechanical and electrical engineering.
  
<p> Frank J. Sprague founded the Sprague Electric Railway and Motor Company, which later developed an electric railway system in Richmond, Virginia using electric traction. </p>
+
<p>[[Charles Proteus Steinmetz|Charles P. Steinmetz]], 1901-02, worked on inventions for electric motors, generators, and street cars.  In addition to his research, he was an electrophysics professor at Union University. </p>
  
<p>[[Edwin Houston|Edwin J. Houston]], 1893-95 </p>
+
<p>[[Charles F. Scott|Charles F. Scott]], 1902-03, created a new method for phase transformation called the “Scott Connection.”  In 1911, Scott became an electrical engineering professor at Yale University, and he served as the head of the Electrical Engineering Program at the university. </p>
  
<p> Edwin J. Houston collaborated with Elihu Thomson to create a successful electric lighting system.  In addition to his inventions, Houston was also a university professor, author, and engineering consultant. </p>
+
<p>[[Bion J. Arnold|Bion J. Arnold]], 1903-04, pioneered street railways in numerous cities across the United States, and he helped to bring electricity to New York’s Grand Central Station.  In addition to his work on railways, Arnold also invented a magnetic clutch and improved storage batteries. </p>
  
<p>[[Louis Duncan|Louis Duncan]], 1895-97 </p>
+
<p>[[John Lieb|John W. Lieb]], 1904-05, experimented with the Brush arc light system in the fall of 1877, which led him to work at the Brush Electric Company and later the Edison Electric Company.  Leib also worked in Italy, where he directed the completion of Milan’s first electric trolley line in 1893. </p>
  
<p> Louis Duncan served as an electrical engineering professor at Johns Hopkins University for 14 yearsAfter retiring from his career in academia, Duncan was an engineering consultant for many traction, utility, and railway companies. </p>
+
<p>[[Schuyler Wheeler|Schuyler Skaats Wheeler]], 1905-06, worked with Francis B. Crocker on small electric motorsWheeler invented the electric fire engine, the electric elevator, and the electric fan among other inventions. </p>
  
<p>[[Francis B. Crocker|Francis B. Crocker]], 1897-98 </p>
+
<p>[[Samuel Sheldon|Samuel Sheldon]], 1906-07, a physics and electrical engineering professor at Polytechnic Institute in Brooklyn, New York.  While at the university, he expanded their laboratories to include physical, mechanical, and electrical engineering research. </p>
  
<p> Francis B. Crocker pioneered the design for commercially successful motorsCrocker also supported the national and international standardization of electrical equipment. </p>
+
<p>[[Henry Stott|Henry G. Stott]], 1907-08, the assistant engineer of Buffalo, New York’s underground cable and conduit systemIn 1901, he became the supervisor for the Interborough Rapid Transit System in New York City. </p>
  
<p>[[Arthur E. Kennelly|Arthur E. Kennelly]], 1898-1900 </p>
+
<p>[[Louis Ferguson|Louis A. Ferguson]], 1908-09, recommended the 3 phase a-c system for substations, and has made important contributions to the development of low voltage distribution. </p>
  
<p> Arthur E. Kennelly co-founded the Heaviside-Kennelly layer in the ionosphere with Oliver Heaviside in 1901, which contributed to the study of radio waves. </p>
+
<p>[[Lewis B. Stillwell|Lewis B. Stillwell]], 1909-10, the director of the Niagara Falls Power Company in 1897, and he became the director of the Rapid Transit Subway Company of New York City in 1900.  In addition to his work as an engineer and a consultant, Stillwell was also an advocate for energy conservation. </p>
 
+
<p>[[Image:AIEE Presidents 0236.jpg|thumb|right|AIEE presidents, including Steinmetz at center]][[Carl Hering|Carl Hering]], 1900-01 </p>
+
 
+
<p> Carl Hering was an electrical engineer who researched storage batteries, designed and improved the electric furnace, and made discoveries regarding electromagnetic force.  Hering also published works about mechanical and electrical engineering. </p>
+
 
+
<p>[[Charles Proteus Steinmetz|Charles P. Steinmetz]], 1901-02 </p>
+
 
+
<p> Charles P. Steinmetz worked on inventions for electric motors, generators, and street cars.  In addition to his research, he was an electrophysics professor at Union University. </p>
+
 
+
<p>[[Charles F. Scott|Charles F. Scott]], 1902-03 </p>
+
 
+
<p> Charles F. Scott created a new method for phase transformation called the “Scott Connection.”  In 1911, Scott became an electrical engineering professor at Yale University, and he served as the head of the Electrical Engineering Program at the university. </p>
+
 
+
<p>[[Bion J. Arnold|Bion J. Arnold]], 1903-04 </p>
+
 
+
<p> Bion J. Arnold pioneered street railways in numerous cities across the United States, and he helped to bring electricity to New York’s Grand Central Station.  In addition to his work on railways, Arnold also invented a magnetic clutch and improved storage batteries. </p>
+
 
+
<p>[[John Lieb|John W. Lieb]], 1904-05 </p>
+
 
+
<p> John W. Leib experimented with the Brush arc light system in the fall of 1877, which led him to work at the Brush Electric Company and later the Edison Electric Company.  Leib also worked in Italy, where he directed the completion of Milan’s first electric trolley line in 1893. </p>
+
 
+
<p>[[Schuyler Wheeler|Schuyler Skaats Wheeler]], 1905-06 </p>
+
 
+
<p> Schuyler Wheeler, along with Francis B. Crocker, were pioneers of small electric motors.  Wheeler invented the electric fire engine, the electric elevator, and the electric fan among other inventions. </p>
+
 
+
<p>[[Samuel Sheldon|Samuel Sheldon]], 1906-07 </p>
+
 
+
<p> Samuel Sheldon was a physics and electrical engineering professor at Polytechnic Institute in Brooklyn, New York.  While at the university, he expanded their laboratories to include physical, mechanical, and electrical engineering research. </p>
+
 
+
<p>[[Henry Stott|Henry G. Stott]], 1907-08 </p>
+
 
+
<p> Henry G. Stott was the assistant engineer of Buffalo, New York’s underground cable and conduit system.  In 1901, he became the supervisor for the Interborough Rapid Transit System in New York City. </p>
+
 
+
<p>[[Louis Ferguson|Louis A. Ferguson]], 1908-09 </p>
+
 
+
<p> Louis A. Ferguson recommended the 3 phase a-c system for substations, and has made important contributions to the development of low voltage distribution. </p>
+
 
+
<p>[[Lewis B. Stillwell|Lewis B. Stillwell]], 1909-10 </p>
+
 
+
<p> Lewis B. Stillwell was the director of the Niagara Falls Power Company in 1897, and he became the director of the Rapid Transit Subway Company of New York City in 1900.  In addition to his work as an engineer and a consultant, Stillwell was also an advocate for energy conservation. </p>
+
 
+
<p>[[Image:1920s photo past AIEE presidents 1795.jpg|thumb|right|A group of past presidents at the AIEE Chicago Convention, June 29, 1911. Photo appears on page 1773 of the 50th Anniversary special issue of "Electrical Engineering." Back row (l-r) Gano Dunn, Dugald C. Jackson, Louis A. Ferguson, Schulyer S. Wheeler, John W. Lied, and Bion J. Arnold.  Front row (l-r) Francis C. Crocker, T. Commeford Martin, Frank J. Sprague and Charles P. Steinmetz.]] </p>
+
  
<p>[[Dugald C. Jackson|Dugald C. Jackson]], 1910-11 </p>
+
<p>[[Dugald C. Jackson|Dugald C. Jackson]], 1910-11, supervised the design and construction of several railway and power plants when he worked as an engineer at Sprague Electric Railway and Motor Company and later as an engineer for Edison General Electric Company.  </p>
  
<p> Dugald C. Jackson supervised the design and construction of several railway and power plants when he worked as an engineer at Sprague Electric Railway and Motor Company and later as an engineer for Edison General Electric Company. </p>
+
<p>[[Gano Dunn|Gano Dunn]], 1911-12, became president of the J. G. White Engineering Corporation in 1913Included among the company’s projects were the United States Naval Oil Base at Pearl Harbor, 13 transoceanic radio stations, and the first long-distance natural gas pipeline in California. </p>
  
<p>[[Gano Dunn|Gano Dunn]], 1911-12 </p>
+
<p>[[Ralph Mershon|Ralph D. Mershon]], 1912-13, an engineer whose most notable contribution to engineering is his work with high voltage transmission.  Mershon also invented a 6-phase rotary converter, the compounded rotary converter, and a compensating voltmeter among other inventions. </p>
  
<p>[[Ralph Mershon|Ralph D. Mershon]], 1912-13 </p>
+
<p>[[C. O. Mailloux|C. O. Mailloux]], 1913-14, the editor of Electric World, and supported the standardization of technical terms. </p>
  
<p>[[C. O. Mailloux|C. O. Mailloux]], 1913-14 </p>
+
<p>[[Paul Lincoln|Paul M. Lincoln]], 1914-15, invented the synchroscope.  He also worked as an electrical engineer, and taught electrical engineering at Cornell University. </p>
  
<p>[[Paul Lincoln|Paul M. Lincoln]], 1914-15 </p>
+
<p>[[John J. Carty|John J. Carty]], 1915-16, designed the “bridging bell”, which allowed extended telephone use to rural areas of the United States.  Carty also announced AT & T’s intention to complete a transcontinental telephone line.  </p>
  
<p>[[John J. Carty|John J. Carty]], 1915-16 </p>
+
<p>[[Harold Buck|Harold W. Buck]], 1916-17, supervised the experimental work that led to the development of the oil circuit breaker and other high voltage devices while working at General Electric Company.  He also worked as the chief electrical engineer at the Niagara Falls Power Company, where he worked on the distribution of power across the U.S.-Canada border. </p>
  
<p>[[Harold Buck|Harold W. Buck]], 1916-17 </p>
+
<p>[[Edwin W. Rice, Jr.|Edwin W. Rice, Jr]]., 1917-18, is considered one of the three fathers of General Electric.  Rice filed over 100 patents for his inventions, which include oil switches of high capacity, arc lamps, and synchronous converters among other creations. </p>
  
<p>[[Edwin W. Rice, Jr.|Edwin W. Rice, Jr]]., 1917-18 </p>
+
<p>[[Comfort Avery Adams|Comfort A. Adams]], 1918-19, worked as an electrical engineering professor at Harvard University.  His interest in welding technology led him to design the first alternating-current transformer, which allowed him to maintain contact with “real world” engineering work.  </p>
  
<p>[[Comfort Avery Adams|Comfort A. Adams]], 1918-19 </p>
+
<p>[[Calvert Townley|Calvert Townley]], 1919-1920, an electrical engineer who worked on the installation and equipment maintenance of transit systems in the Northeast.  Two of his most notable projects were working with electrical equipment in Boston’s South Terminal and the electrification of railroad lines leaving New York City.  </p>
  
<p>[[Calvert Townley|Calvert Townley]], 1919-1920 </p>
+
<p>[[Arthur Berresford|Arthur W. Berresford]], 1920-21, worked as an engineer for the Brooklyn City Railroad Company where he overhauled motors and assisted with trolley line construction.  He later worked for the Riker Electric Company, which manufactured rheostats and electric controlling devices. </p>
  
<p>[[Arthur Berresford|Arthur W. Berresford]], 1920-21 </p>
+
<p>[[William McClellan|William McClellan]], 1921-22, supervised the layout and installation of a high-voltage substation and the car equipment for the Erie Railroad.  He also worked at University of Pennsylvania as a university professor and dean. </p>
  
<p>[[William McClellan|William McClellan]], 1921-22 </p>
+
<p>[[Frank B. Jewett|Frank B. Jewett]], 1922-23, worked as an engineer for AT&T, where his work demonstrated transatlantic radio telephony using a vacuum-tube transmitter. </p>
  
<p>[[Frank B. Jewett|Frank B. Jewett]], 1922-23 </p>
+
<p>[[Harris Ryan|Harris J. Ryan]], 1923-24, a university professor at Cornell University and later Stanford University, where he researched high voltage phenomena.  </p>
  
<p>[[Harris Ryan|Harris J. Ryan]], 1923-24 </p>
+
<p>[[Farley Osgood|Farley Osgood]], 1924-25, a traveling engineer who made inspections and installations for the New England Telephone and Telegraph Company.  He also served as vice president and general manager of Public Service Electric and Gas Company (PSE&G).  </p>
  
<p>[[Farley Osgood|Farley Osgood]], 1924-25 </p>
+
<p>[[Michael Pupin|Michael I. Pupin]], 1925-26, taught mathematical physics at Columbia University.  He also studied wave propagation, and applied his findings to long distance telephony experiments and research. </p>
  
<p>[[Michael Pupin|Michael I. Pupin]], 1925-26 </p>
+
<p>[[Cummings C. Chesney|Cummings C. Chesney]], 1926-27, a member of the Stanley Electric Manufacturing Company, which built the first revolving field type of alternator used in the United States. </p>
  
<p>[[Cummings C. Chesney|Cummings C. Chesney]], 1926-27 </p>
+
<p>[[Bancroft Gherardi|Bancroft Gherardi]], 1927-28, improved telephone transmission circuits by demonstrating that telephone transmission followed the same laws of attenuation as lower frequency telegraph.  </p>
  
<p>[[Bancroft Gherardi|Bancroft Gherardi]], 1927-28 </p>
+
<p>[[Randolph Schuchardt|Rudolph F. Schuchardt]], 1928-29, the chief electrical engineer at Chicago Edison Company.  </p>
  
<p>[[Randolph Schuchardt|Rudolph F. Schuchardt]], 1928-29 </p>
+
<p>[[Harold Smith|Harold B. Smith]], 1929-30, one of the pioneers in developing high-voltage power transmission systems and equipment. </p>
  
<p>[[Harold Smith|Harold B. Smith]], 1929-30 </p>
+
<p>[[William Lee|William S. Lee]], 1930-31, president of W.S. Lee Engineering Corporation of New York and Charlotte.  He also worked with James B. Duke in developing hydroelectric resources in the southern United States.  </p>
  
<p>[[William Lee|William S. Lee]], 1930-31 </p>
+
<p>[[Charles Skinner|Charles E. Skinner]], 1931-32, in charge of the insulation design and magnetic testing departments at Westinghouse Company, and he later organized a research division for the company’s engineering department.  Skinner was also active in the field of international standardization. </p>
  
<p>[[Charles Skinner|Charles E. Skinner]], 1931-32 </p>
+
<p>[[Harry Charlesworth|Harry P. Charlesworth]], 1932-33, vice president of Bell Telephone Laboratories, Inc., where he directed the development and research of telephone communication. </p>
  
<p>[[Harry Charlesworth|Harry P. Charlesworth]], 1932-33 </p>
+
<p>[[John Whitehead|John B. Whitehead]], 1933-34, a professor Johns Hopkins University.  He also was commissioned as a major in the Corps of Engineers in the U.S. Army during World War I, and he served as an adviser to the Navy during World War II. </p>
  
<p>[[John Whitehead|John B. Whitehead]], 1933-34 </p>
+
<p>[[J. Allen Johnson|J. Allen Johnson]], 1934-35, served as the chief electrical engineer of the Buffalo Niagara Eastern Power Corporation.  </p>
  
<p>[[J. Allen Johnson|J. Allen Johnson]], 1934-35 </p>
+
<p>[[Edward Meyer|Edward B. Meyer]], 1935-36, was the chief electrical engineer of the Public Service Corporation of New Jersey.  </p>
  
<p>[[Edward Meyer|Edward B. Meyer]], 1935-36 </p>
+
<p>[[Alexander MacCutcheon|Alexander M. MacCutcheon]], 1936-37, the chief engineer for the Reliance Electric and Engineering Company.  </p>
  
<p>[[Alexander MacCutcheon|Alexander M. MacCutcheon]], 1936-37 </p>
+
<p>[[William Harrison|William H. Harrison]], 1937-38, member of the engineering staff at the American Telephone and Telegraph Company.  He was later the plant engineer at the Bell Telephone System central office.  </p>
  
<p>[[William Harrison|William H. Harrison]], 1937-38 </p>
+
<p>[[John Castlereagh Parker|John Castlereagh Parker]], 1938-39, was part responsible for the reconstruction of the Brooklyn Edison Company’s electrical system.  He also served as the vice president in charge of engineering of the Hudson Avenue Station in Brooklyn, which would become the world’s largest steam-electric generating station. </p>
  
<p>[[John Castlereagh Parker|John Castlereagh Parker]], 1938-39 </p>
+
<p>[[F. Malcolm Farmer|F. Malcolm Farmer]], 1939-40, was a member of several standardization organizations, and he was also a published author. </p>
  
<p>[[F. Malcolm Farmer|F. Malcolm Farmer]], 1939-40 </p>
+
<p>[[Royal Sorensen|Royal W. Sorensen]], 1940-41, was a leader in the field of high-voltage, long distance electrical transmission, and he invented the vacuum switch for high-current electrical circuit.  Sorensen was also worked as an electrical engineering professor at Throop/Caltech.  </p>
  
<p>[[Royal Sorensen|Royal W. Sorensen]], 1940-41 </p>
+
<p>[[David Prince|David C. Prince]], 1941-42, managed the commercial engineering department at General Electric Company.  </p>
  
<p>[[David Prince|David C. Prince]], 1941-42 </p>
+
<p>[[Harold Osborne|Harold S. Osborne]], 1942-43, worked on wireless telephony.  He is also a former mayor of Montclair, New Jersey. </p>
  
<p>[[Harold Osborne|Harold S. Osborne]], 1942-43 </p>
+
<p>[[Nevin Funk|Nevin E. Funk]], 1943-44, was vice president in charge of engineering at the Philadelphia Electric Company. </p>
  
<p>[[Nevin Funk|Nevin E. Funk]], 1943-44 </p>
+
<p>[[Charles Powel|Charles A. Powel]], 1944-45, was the assistant to the vice president of engineering for Westinghouse in East Pittsburgh, Pennsylvania. </p>
  
<p>[[Charles Powel|Charles A. Powel]], 1944-45 </p>
+
<p>[[William Wickenden|William E. Wickenden]], 1945-46, was elected president of Case School of Applied Science at Case Western Reserve University in 1929. </p>
  
<p>[[William Wickenden|William E. Wickenden]], 1945-46 </p>
+
<p>[[J. Elmer Housley|J. Elmer Housley]], 1946-47, was in charge of engineering at the Aluminum Company of America, and supervised the operation and maintenance of the company’s hydro-electric power system. </p>
  
<p>[[J. Elmer Housley|J. Elmer Housley]], 1946-47 </p>
+
<p>[[Blake Hull|Blake D. Hull]], 1947-48, became chief engineer for Southwestern Bell Telephone Company in 1936. </p>
  
<p>[[Blake Hull|Blake D. Hull]], 1947-48 </p>
+
<p>[[Everett Lee|Everett S. Lee]], 1948-49, became the Consulting Laboratory Engineer for General Electric in 1945, and he was the editor for the General Electric Review from 1951 to 1958.  </p>
  
<p>[[Everett Lee|Everett S. Lee]], 1948-49 </p>
+
<p>[[James F. Fairman|James F. Fairman]], 1949-50, elected vice president on Consolidated Edison Company of New York, Inc., and supervised electric and gas production and operation. </p>
  
<p>[[James F. Fairman|James F. Fairman]], 1949-50 </p>
+
<p>[[Titus G. LeClair|Titus G. LeClair]], 1950-51, invented relay schemes, switching schemes, automatic printing meters, and special conductors. </p>
  
<p>[[Titus G. LeClair|Titus G. LeClair]], 1950-51 </p>
+
<p>[[Fred O. McMillan|Fred O. McMillan]], 1951-52, was an engineering professor at many U.S. universities, and he also was a consulting engineer for a number of public utility companies. </p>
  
<p>[[Fred O. McMillan|Fred O. McMillan]], 1951-52 </p>
+
<p>[[Donald A. Quarles|Donald A. Quarles]], 1952-53, was vice president of Bell Telephone Laboratories.  In 1954, President Eisenhower appointed him as a member of the National Advisory Committee for Aeronautics.  </p>
  
<p>[[Donald A. Quarles|Donald A. Quarles]], 1952-53 </p>
+
<p>[[Elgin B. Robertson|Elgin B. Robertson]], 1953-54, was chief electrical engineer, and later became midwest manager for The Railway and Industrial Engine Company. </p>
  
<p>[[Elgin B. Robertson|Elgin B. Robertson]], 1953-54 </p>
+
<p>[[Alexander Monteith|Alexander C. Monteith]], 1954-55, was vice president and chairman of the Westinghouse Educational Foundation. </p>
  
<p>[[Alexander Monteith|Alexander C. Monteith]], 1954-55 </p>
+
<p>[[Morris D. Hooven|Morris D. Hooven]], 1955-56, served on the inter-utilities committee at the Public Service Electric Company (PSE&G), which established the Pennsylvania-New Jersey 220 kv Interconnection.  He also worked on other committees that developed load studies, operating communications, river basin studies, and plant designs.  </p>
  
<p>[[Morris D. Hooven|Morris D. Hooven]], 1955-56 </p>
+
<p>[[Mervin S. Coover|Mervin S. Coover]], 1956-57, worked at the University of Colorado as both a professor and a dean.  He also served as the assistant regional coordinator of the Engineering Science and Management Defense Training Program. </p>
  
<p>[[Mervin S. Coover|Mervin S. Coover]], 1956-57 </p>
+
<p>[[Walter J. Barrett|Walter J. Barrett]], 1957-58, worked in the Operation and Engineering Department at the American Telephone and Telegraph Company in New York City.  He later was employed in the Engineering Department at the New Jersey Bell Telephone Company. </p>
  
<p>[[Walter J. Barrett|Walter J. Barrett]], 1957-58 </p>
+
<p>[[L. F. Hickernell|L. F. Hickernell]], 1958-59, became vice president of engineering for the Anaconda Wire & Cable Company in 1957. </p>
  
<p>[[L. F. Hickernell|L. F. Hickernell]], 1958-59 </p>
+
<p>[[James Foote|James H. Foote]], 1959-60, was chief engineer for Commonwealth Associates, Inc., and he also served as director of Atomic Power Development Associates, Inc. </p>
  
<p>[[James Foote|James H. Foote]], 1959-60 </p>
+
<p>[[Clarence H. Linder|Clarence H. Linder]], 1960-61, was the vice president and group executive for the General Electric Company. </p>
  
<p>[[Clarence H. Linder|Clarence H. Linder]], 1960-61 </p>
+
<p>[[Warren Chase|Warren J. Chase]], 1961-62, served as chief engineer and later was appointed vice president of Ohio Bell Telephone Company. </p>
  
<p>[[Warren Chase|Warren J. Chase]], 1961-62 </p>
+
<p>[[B. Richard Teare, Jr.|B. Richard Teare, Jr]]., 1962-63, was an electrical engineering professor at Yale University and later at the Carnegie Institute of Technology.  </p>
  
<p>[[B. Richard Teare, Jr.|B. Richard Teare, Jr]]., 1962-63 </p>
+
== Further Reading ==
  
<p><br><br>See also [[Presidents of the Institute of Radio Engineers (IRE)|Presidents of the&nbsp;IRE]] and [[Presidents of the Institute of Electrical and Electronics Engineers (IEEE)|Presidents of the IEEE]]. </p>
+
<p>Also see [[Presidents of the Institute of Radio Engineers (IRE)|Presidents of the&nbsp;IRE]] and [[Presidents of the Institute of Electrical and Electronics Engineers (IEEE)|Presidents of the IEEE]]. </p>
  
<p> [[Category:History_&_heritage|Category:History_&amp;_heritage]] </p>
+
[[Category:History_&_heritage|AIEE]]

Revision as of 20:46, 13 February 2012

AIEE Presidents, 1884-1961

AIEE presidents, including Steinmetz at center
AIEE presidents, including Steinmetz at center

A group of past presidents at the AIEE Chicago Convention, June 29, 1911. Photo appears on page 1773 of the 50th Anniversary special issue of "Electrical Engineering." Back row (l-r) Gano Dunn, Dugald C. Jackson, Louis A. Ferguson, Schulyer S. Wheeler, John W. Lied, and Bion J. Arnold.  Front row (l-r) Francis C. Crocker, T. Commeford Martin, Frank J. Sprague and Charles P. Steinmetz.
A group of past presidents at the AIEE Chicago Convention, June 29, 1911. Photo appears on page 1773 of the 50th Anniversary special issue of "Electrical Engineering." Back row (l-r) Gano Dunn, Dugald C. Jackson, Louis A. Ferguson, Schulyer S. Wheeler, John W. Lied, and Bion J. Arnold. Front row (l-r) Francis C. Crocker, T. Commeford Martin, Frank J. Sprague and Charles P. Steinmetz.

Norvin Green, 1884-86, became the president of Western Union in 1878. He later was one of the founders of the AIEE in the early 1880s.

Franklin L. Pope, 1886-87, one of America’s first practicing electrical engineers. In addition to his inventions and patents, which greatly contributed to the field of electrical engineering, he authored several books in the genres of literature, history, and genealogy.

T. Commerford Martin, 1887-88, editor of electrical magazines and an author of various works. He also worked for the U.S. Census Office from 1900-1915, where he wrote reports about electrical industries and utilities.

Edward Weston, 1888-89, improved electrical instruments so that they would be more portable and that their measurements would become more accurate. In 1908, his standard cell became the universal standard of electromotive force.

Elihu Thomson, 1889-90, his invention of the 3 coil dynamo was the foundation to a successful electric lighting system that he and colleague E. J. Houston produced in 1879 through their company Thomson-Houston Electric Company. This company merged with Edison General Electric Company in 1892 to form General Electric Company.

William A. Anthony, 1890-91, professor of physics and mechanics at many U.S. universities. In addition to teaching, he also contributed articles to many electrical engineering magazines, and was an electric engineer consultant in New York City.

Alexander Graham Bell, 1891-92, most known for his invention of the telephone in 1876.

Frank Julian Sprague, 1892-93, founded the Sprague Electric Railway and Motor Company, which later developed an electric railway system in Richmond, Virginia using electric traction.

Edwin J. Houston, 1893-95, collaborated with Elihu Thomson to create a successful electric lighting system. In addition to his inventions, Houston was also a university professor, author, and engineering consultant.

Louis Duncan, 1895-97, served as an electrical engineering professor at Johns Hopkins University for 14 years. After retiring from his career in academia, Duncan was an engineering consultant for many traction, utility, and railway companies.

Francis B. Crocker, 1897-98, pioneered the design for commercially successful motors. Crocker also supported the national and international standardization of electrical equipment.

Arthur E. Kennelly, 1898-1900, co-founded the Heaviside-Kennelly layer in the ionosphere with Oliver Heaviside in 1901, which contributed to the study of radio waves.

Carl Hering, 1900-01, an electrical engineer who researched storage batteries, designed and improved the electric furnace, and made discoveries regarding electromagnetic force. Hering also published works about mechanical and electrical engineering.

Charles P. Steinmetz, 1901-02, worked on inventions for electric motors, generators, and street cars. In addition to his research, he was an electrophysics professor at Union University.

Charles F. Scott, 1902-03, created a new method for phase transformation called the “Scott Connection.” In 1911, Scott became an electrical engineering professor at Yale University, and he served as the head of the Electrical Engineering Program at the university.

Bion J. Arnold, 1903-04, pioneered street railways in numerous cities across the United States, and he helped to bring electricity to New York’s Grand Central Station. In addition to his work on railways, Arnold also invented a magnetic clutch and improved storage batteries.

John W. Lieb, 1904-05, experimented with the Brush arc light system in the fall of 1877, which led him to work at the Brush Electric Company and later the Edison Electric Company. Leib also worked in Italy, where he directed the completion of Milan’s first electric trolley line in 1893.

Schuyler Skaats Wheeler, 1905-06, worked with Francis B. Crocker on small electric motors. Wheeler invented the electric fire engine, the electric elevator, and the electric fan among other inventions.

Samuel Sheldon, 1906-07, a physics and electrical engineering professor at Polytechnic Institute in Brooklyn, New York. While at the university, he expanded their laboratories to include physical, mechanical, and electrical engineering research.

Henry G. Stott, 1907-08, the assistant engineer of Buffalo, New York’s underground cable and conduit system. In 1901, he became the supervisor for the Interborough Rapid Transit System in New York City.

Louis A. Ferguson, 1908-09, recommended the 3 phase a-c system for substations, and has made important contributions to the development of low voltage distribution.

Lewis B. Stillwell, 1909-10, the director of the Niagara Falls Power Company in 1897, and he became the director of the Rapid Transit Subway Company of New York City in 1900. In addition to his work as an engineer and a consultant, Stillwell was also an advocate for energy conservation.

Dugald C. Jackson, 1910-11, supervised the design and construction of several railway and power plants when he worked as an engineer at Sprague Electric Railway and Motor Company and later as an engineer for Edison General Electric Company.

Gano Dunn, 1911-12, became president of the J. G. White Engineering Corporation in 1913. Included among the company’s projects were the United States Naval Oil Base at Pearl Harbor, 13 transoceanic radio stations, and the first long-distance natural gas pipeline in California.

Ralph D. Mershon, 1912-13, an engineer whose most notable contribution to engineering is his work with high voltage transmission. Mershon also invented a 6-phase rotary converter, the compounded rotary converter, and a compensating voltmeter among other inventions.

C. O. Mailloux, 1913-14, the editor of Electric World, and supported the standardization of technical terms.

Paul M. Lincoln, 1914-15, invented the synchroscope. He also worked as an electrical engineer, and taught electrical engineering at Cornell University.

John J. Carty, 1915-16, designed the “bridging bell”, which allowed extended telephone use to rural areas of the United States. Carty also announced AT & T’s intention to complete a transcontinental telephone line.

Harold W. Buck, 1916-17, supervised the experimental work that led to the development of the oil circuit breaker and other high voltage devices while working at General Electric Company. He also worked as the chief electrical engineer at the Niagara Falls Power Company, where he worked on the distribution of power across the U.S.-Canada border.

Edwin W. Rice, Jr., 1917-18, is considered one of the three fathers of General Electric. Rice filed over 100 patents for his inventions, which include oil switches of high capacity, arc lamps, and synchronous converters among other creations.

Comfort A. Adams, 1918-19, worked as an electrical engineering professor at Harvard University. His interest in welding technology led him to design the first alternating-current transformer, which allowed him to maintain contact with “real world” engineering work.

Calvert Townley, 1919-1920, an electrical engineer who worked on the installation and equipment maintenance of transit systems in the Northeast. Two of his most notable projects were working with electrical equipment in Boston’s South Terminal and the electrification of railroad lines leaving New York City.

Arthur W. Berresford, 1920-21, worked as an engineer for the Brooklyn City Railroad Company where he overhauled motors and assisted with trolley line construction. He later worked for the Riker Electric Company, which manufactured rheostats and electric controlling devices.

William McClellan, 1921-22, supervised the layout and installation of a high-voltage substation and the car equipment for the Erie Railroad. He also worked at University of Pennsylvania as a university professor and dean.

Frank B. Jewett, 1922-23, worked as an engineer for AT&T, where his work demonstrated transatlantic radio telephony using a vacuum-tube transmitter.

Harris J. Ryan, 1923-24, a university professor at Cornell University and later Stanford University, where he researched high voltage phenomena.

Farley Osgood, 1924-25, a traveling engineer who made inspections and installations for the New England Telephone and Telegraph Company. He also served as vice president and general manager of Public Service Electric and Gas Company (PSE&G).

Michael I. Pupin, 1925-26, taught mathematical physics at Columbia University. He also studied wave propagation, and applied his findings to long distance telephony experiments and research.

Cummings C. Chesney, 1926-27, a member of the Stanley Electric Manufacturing Company, which built the first revolving field type of alternator used in the United States.

Bancroft Gherardi, 1927-28, improved telephone transmission circuits by demonstrating that telephone transmission followed the same laws of attenuation as lower frequency telegraph.

Rudolph F. Schuchardt, 1928-29, the chief electrical engineer at Chicago Edison Company.

Harold B. Smith, 1929-30, one of the pioneers in developing high-voltage power transmission systems and equipment.

William S. Lee, 1930-31, president of W.S. Lee Engineering Corporation of New York and Charlotte. He also worked with James B. Duke in developing hydroelectric resources in the southern United States.

Charles E. Skinner, 1931-32, in charge of the insulation design and magnetic testing departments at Westinghouse Company, and he later organized a research division for the company’s engineering department. Skinner was also active in the field of international standardization.

Harry P. Charlesworth, 1932-33, vice president of Bell Telephone Laboratories, Inc., where he directed the development and research of telephone communication.

John B. Whitehead, 1933-34, a professor Johns Hopkins University. He also was commissioned as a major in the Corps of Engineers in the U.S. Army during World War I, and he served as an adviser to the Navy during World War II.

J. Allen Johnson, 1934-35, served as the chief electrical engineer of the Buffalo Niagara Eastern Power Corporation.

Edward B. Meyer, 1935-36, was the chief electrical engineer of the Public Service Corporation of New Jersey.

Alexander M. MacCutcheon, 1936-37, the chief engineer for the Reliance Electric and Engineering Company.

William H. Harrison, 1937-38, member of the engineering staff at the American Telephone and Telegraph Company. He was later the plant engineer at the Bell Telephone System central office.

John Castlereagh Parker, 1938-39, was part responsible for the reconstruction of the Brooklyn Edison Company’s electrical system. He also served as the vice president in charge of engineering of the Hudson Avenue Station in Brooklyn, which would become the world’s largest steam-electric generating station.

F. Malcolm Farmer, 1939-40, was a member of several standardization organizations, and he was also a published author.

Royal W. Sorensen, 1940-41, was a leader in the field of high-voltage, long distance electrical transmission, and he invented the vacuum switch for high-current electrical circuit. Sorensen was also worked as an electrical engineering professor at Throop/Caltech.

David C. Prince, 1941-42, managed the commercial engineering department at General Electric Company.

Harold S. Osborne, 1942-43, worked on wireless telephony. He is also a former mayor of Montclair, New Jersey.

Nevin E. Funk, 1943-44, was vice president in charge of engineering at the Philadelphia Electric Company.

Charles A. Powel, 1944-45, was the assistant to the vice president of engineering for Westinghouse in East Pittsburgh, Pennsylvania.

William E. Wickenden, 1945-46, was elected president of Case School of Applied Science at Case Western Reserve University in 1929.

J. Elmer Housley, 1946-47, was in charge of engineering at the Aluminum Company of America, and supervised the operation and maintenance of the company’s hydro-electric power system.

Blake D. Hull, 1947-48, became chief engineer for Southwestern Bell Telephone Company in 1936.

Everett S. Lee, 1948-49, became the Consulting Laboratory Engineer for General Electric in 1945, and he was the editor for the General Electric Review from 1951 to 1958.

James F. Fairman, 1949-50, elected vice president on Consolidated Edison Company of New York, Inc., and supervised electric and gas production and operation.

Titus G. LeClair, 1950-51, invented relay schemes, switching schemes, automatic printing meters, and special conductors.

Fred O. McMillan, 1951-52, was an engineering professor at many U.S. universities, and he also was a consulting engineer for a number of public utility companies.

Donald A. Quarles, 1952-53, was vice president of Bell Telephone Laboratories. In 1954, President Eisenhower appointed him as a member of the National Advisory Committee for Aeronautics.

Elgin B. Robertson, 1953-54, was chief electrical engineer, and later became midwest manager for The Railway and Industrial Engine Company.

Alexander C. Monteith, 1954-55, was vice president and chairman of the Westinghouse Educational Foundation.

Morris D. Hooven, 1955-56, served on the inter-utilities committee at the Public Service Electric Company (PSE&G), which established the Pennsylvania-New Jersey 220 kv Interconnection. He also worked on other committees that developed load studies, operating communications, river basin studies, and plant designs.

Mervin S. Coover, 1956-57, worked at the University of Colorado as both a professor and a dean. He also served as the assistant regional coordinator of the Engineering Science and Management Defense Training Program.

Walter J. Barrett, 1957-58, worked in the Operation and Engineering Department at the American Telephone and Telegraph Company in New York City. He later was employed in the Engineering Department at the New Jersey Bell Telephone Company.

L. F. Hickernell, 1958-59, became vice president of engineering for the Anaconda Wire & Cable Company in 1957.

James H. Foote, 1959-60, was chief engineer for Commonwealth Associates, Inc., and he also served as director of Atomic Power Development Associates, Inc.

Clarence H. Linder, 1960-61, was the vice president and group executive for the General Electric Company.

Warren J. Chase, 1961-62, served as chief engineer and later was appointed vice president of Ohio Bell Telephone Company.

B. Richard Teare, Jr., 1962-63, was an electrical engineering professor at Yale University and later at the Carnegie Institute of Technology.

Further Reading

Also see Presidents of the IRE and Presidents of the IEEE.