Milestones:Plaque mounting details: Difference between revisions
No edit summary |
No edit summary |
||
Line 5: | Line 5: | ||
There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long. | There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long. | ||
<br> | |||
We recommend waiting until you have the actual plaques in hand before drilling any mounting holes or preparing the masonry. | |||
<br> | |||
Below is a rough diagram of the plaque as seen from the back. | Below is a rough diagram of the plaque as seen from the back. | ||
Line 15: | Line 15: | ||
[[Image:Resized milestone plaque diagram.jpg|Image:Resized_milestone_plaque_diagram.jpg]] | [[Image:Resized milestone plaque diagram.jpg|Image:Resized_milestone_plaque_diagram.jpg]] | ||
[[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]] | [[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]] <span id="fck_dom_range_temp_1293546085986_811"></span><span id="fck_dom_range_temp_1293546085986_197"></span><span id="fck_dom_range_temp_1293546085986_975"></span><span id="fck_dom_range_temp_1293546085986_733"></span> | ||
Back to: [[Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone|Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone]] |
Revision as of 14:21, 28 December 2010
Milestone plaque mounting details
The milestone plaques come with six mounting holes in the back. There are four at the corners: 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) or 1.95 inches/4.596cm in from the edges.
There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.
We recommend waiting until you have the actual plaques in hand before drilling any mounting holes or preparing the masonry.
Below is a rough diagram of the plaque as seen from the back.
Back to: Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone