Milestones:Plaque mounting details: Difference between revisions
From ETHW
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
== Milestone plaque mounting details == | == Milestone plaque mounting details == | ||
The milestone plaques come with six mounting holes in the back. There are four at the corners 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) | The milestone plaques come with six mounting holes in the back. There are four at the corners: 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) or 1.95 inches/4.596cm in from the edges. | ||
There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long. | |||
Below is a rough diagram of the plaque as seen from the back. | |||
[[Image:Resized milestone plaque diagram.jpg|Image:Resized_milestone_plaque_diagram.jpg]] | |||
[[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]] | [[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]] |
Revision as of 14:02, 16 December 2010
Milestone plaque mounting details
The milestone plaques come with six mounting holes in the back. There are four at the corners: 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) or 1.95 inches/4.596cm in from the edges.
There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.
Below is a rough diagram of the plaque as seen from the back.