IEEE

Milestones:FM Police Radio Communication, 1940

SHARE |

From GHN

(Difference between revisions)
Jump to: navigation, search
Line 1: Line 1:
[[Image:FM Police Radio Communication.jpg|thumb|Photograph used by permission of Motorola]]Hartford, CT Dedicated June 1987 - IEEE Connecticut Section 
+
[[Image:FM Police Radio Communication.jpg|thumb|Photograph used by permission of Motorola]]Hartford, CT Dedicated June 1987 - [[IEEE Connecticut Section History|IEEE Connecticut Section]]
  
 
''A major advance in police radio occurred in 1940 when the Connecticut state police began operating a two-way, frequency modulated (FM) system in Hartford. The statewide system developed by Daniel E. Noble of the University of Connecticut and engineers at the Fred M. Link Company greatly reduced static, the main problem of the amplitude modulated (AM) system. FM mobile radio became standard throughout the country following the success of the Connecticut system.''  
 
''A major advance in police radio occurred in 1940 when the Connecticut state police began operating a two-way, frequency modulated (FM) system in Hartford. The statewide system developed by Daniel E. Noble of the University of Connecticut and engineers at the Fred M. Link Company greatly reduced static, the main problem of the amplitude modulated (AM) system. FM mobile radio became standard throughout the country following the success of the Connecticut system.''  
  
In 1939, Edward J. Hickey, Commissioner of the Connecticut State Police, asked Daniel Noble, a professor of electrical engineering at the University of Connecticut, to design a mobile-radio system for the State Police. A one-way system was suggested, but Noble, who had designed two-way AM units and FM broadcast stations, recommended a two-way, FM system. Receiving the go-ahead from Hickey, Noble drew up a circuit design and specifications, from which a practical unit was built by Fred Budelman, chief engineer of the Fred M. Link Company. Noble later said that the success of the system was due to choosing phase modulation, selecting proper station sites, using rooftop antennas on the cars, and employing different transmitting frequencies for the base stations and mobile units. The system began operations at Hartford in 1940, signaling the nationwide switch from AM to FM. <br> <googlemap controls="small" height="250" width="300" zoom="10" lon="-72.681905" lat="41.759612" version="0.9">
+
In 1939, Edward J. Hickey, Commissioner of the Connecticut State Police, asked Daniel Noble, a professor of electrical engineering at the University of Connecticut, to design a mobile-radio system for the State Police. A one-way system was suggested, but Noble, who had designed two-way AM units and FM broadcast stations, recommended a two-way, FM system. Receiving the go-ahead from Hickey, Noble drew up a circuit design and specifications, from which a practical unit was built by Fred Budelman, chief engineer of the Fred M. Link Company. Noble later said that the success of the system was due to choosing phase modulation, selecting proper station sites, using rooftop antennas on the cars, and employing different transmitting frequencies for the base stations and mobile units. The system began operations at Hartford in 1940, signaling the nationwide switch from AM to FM. <br> <googlemap version="0.9" lat="41.759612" lon="-72.681905" zoom="10" width="300" height="250" controls="small">
 
41.759612, -72.681905,
 
41.759612, -72.681905,
 
FM Police Radio Communication, 1940
 
FM Police Radio Communication, 1940
Line 9: Line 9:
 
</googlemap>  
 
</googlemap>  
  
[[Category:Communications|{{PAGENAME}}]] [[Category:Radio_communication|{{PAGENAME}}]] [[Category:Land_mobile_radio|{{PAGENAME}}]][[Category:News]]
+
[[Category:Communications|{{PAGENAME}}]] [[Category:Radio_communication|{{PAGENAME}}]] [[Category:Land_mobile_radio|{{PAGENAME}}]] [[Category:News|Milestones:FM Police Radio Communication, 1940]]

Revision as of 19:46, 15 September 2009

Photograph used by permission of Motorola
Photograph used by permission of Motorola
Hartford, CT Dedicated June 1987 - IEEE Connecticut Section

A major advance in police radio occurred in 1940 when the Connecticut state police began operating a two-way, frequency modulated (FM) system in Hartford. The statewide system developed by Daniel E. Noble of the University of Connecticut and engineers at the Fred M. Link Company greatly reduced static, the main problem of the amplitude modulated (AM) system. FM mobile radio became standard throughout the country following the success of the Connecticut system.

In 1939, Edward J. Hickey, Commissioner of the Connecticut State Police, asked Daniel Noble, a professor of electrical engineering at the University of Connecticut, to design a mobile-radio system for the State Police. A one-way system was suggested, but Noble, who had designed two-way AM units and FM broadcast stations, recommended a two-way, FM system. Receiving the go-ahead from Hickey, Noble drew up a circuit design and specifications, from which a practical unit was built by Fred Budelman, chief engineer of the Fred M. Link Company. Noble later said that the success of the system was due to choosing phase modulation, selecting proper station sites, using rooftop antennas on the cars, and employing different transmitting frequencies for the base stations and mobile units. The system began operations at Hartford in 1940, signaling the nationwide switch from AM to FM.