Early Electrification of Buffalo: Electricity Distribution Within Buffalo
From GHN
(Difference between revisions)| Line 67: | Line 67: | ||
[[Image:07-103 Pan American Exposition at Night.GIF|thumb|left|Pan American Exposition At Night]]A major user of electricity from May to November 1901 was the Pan American Exposition. The map shows the route of the transmission lines from Niagara Falls and the location of the Exhibition in Buffalo but does not show how 11,000 V was transmitted from Terminal House A to the Electricity Building on the Exhibition grounds for the 5,000-hp electrical load. 200,000 eight-candlepower incandescent lamps were used. Three water rheostats were used to bring the exterior lamps up to full glow in 80 seconds to create the Pan-Am’s most spectacular visual effect.<sup>xi</sup> | [[Image:07-103 Pan American Exposition at Night.GIF|thumb|left|Pan American Exposition At Night]]A major user of electricity from May to November 1901 was the Pan American Exposition. The map shows the route of the transmission lines from Niagara Falls and the location of the Exhibition in Buffalo but does not show how 11,000 V was transmitted from Terminal House A to the Electricity Building on the Exhibition grounds for the 5,000-hp electrical load. 200,000 eight-candlepower incandescent lamps were used. Three water rheostats were used to bring the exterior lamps up to full glow in 80 seconds to create the Pan-Am’s most spectacular visual effect.<sup>xi</sup> | ||
| − | == References<br> == | + | == References<br> == |
| − | i. Stillwell, “Electric Transmission,” 517. | + | i. Stillwell, “Electric Transmission,” 517. |
| − | ii. Related to the author by Jack Pfohl, NMP Electric Planner, ca. 1953. | + | ii. Related to the author by Jack Pfohl, NMP Electric Planner, ca. 1953. |
iii. Harold W. Buck, “The Buffalo High-Tension Cable Distribution System,” ''Transactions of the American Institute of Electrical Engineers'', 18, (1901): 836. | iii. Harold W. Buck, “The Buffalo High-Tension Cable Distribution System,” ''Transactions of the American Institute of Electrical Engineers'', 18, (1901): 836. | ||
| − | iv. Author’s recollection from personal observation during work as NMP Underground Engineer. | + | iv. Author’s recollection from personal observation during work as NMP Underground Engineer. |
| − | v. Editorial Staff of the Edison Electric Institute Transmission and Distribution Committee. ''Underground Systems Reference Book'' (New York, NY: Edison Electric Institute,1957), xviii. | + | v. Editorial Staff of the Edison Electric Institute Transmission and Distribution Committee. ''Underground Systems Reference Book'' (New York, NY: Edison Electric Institute,1957), xviii. |
| − | vi. Henry Gordon Stott, “The Distribution and Conversion of Received Currents,” ''Transactions of the American Institute of Electrical Engineers'', 18, (1901): 136. | + | vi. Henry Gordon Stott, “The Distribution and Conversion of Received Currents,” ''Transactions of the American Institute of Electrical Engineers'', 18, (1901): 136. |
| − | vii. Adams, ''Niagara Power'', 2:7. | + | vii. Adams, ''Niagara Power'', 2:7. |
| − | viii. Ibid., 287. Stott, “Distribution and Conversion,” 125-152. Stillwell, “Electric Transmission,” 517-522. | + | viii. Ibid., 287. Stott, “Distribution and Conversion,” 125-152. Stillwell, “Electric Transmission,” 517-522. |
| − | ix. Stott, “Distribution and Conversion,” 141-152. Buck, “Buffalo High-Tension,” 835-841. Charles Brand, “History of the 60 Cycle System” (Buffalo General Electric Company, Buffalo, NY, 1922, photocopy). | + | ix. Stott, “Distribution and Conversion,” 141-152. Buck, “Buffalo High-Tension,” 835-841. Charles Brand, “History of the 60 Cycle System” (Buffalo General Electric Company, Buffalo, NY, 1922, photocopy). |
| − | x. ''Niagara Mohawk Story'', 75. | + | x. ''Niagara Mohawk Story'', 75. |
| − | xi. Buck, “Buffalo High-Tension,” 836. Daniel E. Nye, ''Electrifying America: Social Meanings of a New Technology'', 1880-1940 (Cambridge, Massachusetts: MIT Press, 1992), 41-47. Thomas E. Leary and Elizabeth C. Sholes, ''Images of America: Buffalo’s Pan-American Exposition''. (Charleston, CS: Arcadia Publishing, 1998), 47-60.<br><br> | + | xi. Buck, “Buffalo High-Tension,” 836. Daniel E. Nye, ''Electrifying America: Social Meanings of a New Technology'', 1880-1940 (Cambridge, Massachusetts: MIT Press, 1992), 41-47. Thomas E. Leary and Elizabeth C. Sholes, ''Images of America: Buffalo’s Pan-American Exposition''. (Charleston, CS: Arcadia Publishing, 1998), 47-60.<br><br> |
| − | <br> <pageby | + | <br> <pageby nominor="false" comments="false"></pageby>; |
<br> | <br> | ||
| Line 121: | Line 121: | ||
[[Category:Power,_energy_&_industry_application|Category:Power,_energy_&_industry_application]] [[Category:Power_systems]] [[Category:Electric_power_systems]] | [[Category:Power,_energy_&_industry_application|Category:Power,_energy_&_industry_application]] [[Category:Power_systems]] [[Category:Electric_power_systems]] | ||
| + | |||
| + | [[Category:Power%2C_energy_%26_industry_application]] | ||
| + | [[Category:Power_engineering]] | ||
| + | [[Category:Electrification]] | ||
Revision as of 14:12, 29 September 2008
Although oil-impregnated, laminated paper-insulated, lead-covered cable had been invented in 1890, the power company was doubtful. They had Dr. Habershaw of the India Rubber & Gutta Percha Company develop a three-conductor, 11,000-V cable with #3/0 American Wire Gauge stranded-copper conductors, rubber insulation and a lead cover.v Ozone breakdown of the insulation at the cable terminations was a problem until a compound filled ‘pothead’ was developed.vi
The Buffalo load grew slowly. Quoting from Adams ‘Niagara Power’ book, “It was recognized that the old-time manufacturer hesitated to give up his personal supervision of his own supply of power, however crudely and efficiently applied, and to take in its place a comparatively delicate piece of machinery he did not understand, that was activated by a wire, the operation of which was startling to hear, dazzling to see, and dangerous to touch.”vii
Four 11,000-V, #3/0-AWG copper conductor rubber-insulated cables and one paper-insulated cable connected Terminal House A to the Cataract Power stations and the trolley company’s stations. Oil sectionalizing switches were installed on the cables about every mile to aid in cable failure location. At Stations 1, 2 and 3, Cataract Power owned transformation from 11,000 V to 2200 V which was distributed underground and overhead to customers for use in malt houses, grain elevators, machine shops, dry docks, bakeries, tanneries, etc.
11,000 V was also transformed to 360 V which was used in an adjacent building by Buffalo General Electric for motor generator sets and rotary converters for four different kinds of service:
1. Constant current dc for street arc lighting.
2. 62 ½ Hz (two-phase four-wire) for incandescent and arc lighting. Three phase machines were first used in 1914.
3. Three wire 110/220 V dc for the downtown district Edison System.
4. 500 V dc for power to motors and elevators. (500 V had previously been supplied by steam engine driven generators).
Years ago a retiree told me that each station had two operators on duty: the Cataract Power operator worked an 8 hour shift, and the Buffalo General Electric operator worked a 12 hour shift.
Storage batteries were installed at some trolley company and Buffalo General Electric stations to help carry peak dc loads and provide backup for equipment outages.ix With continuity of service assured, Buffalo General Electric abandoned its steam plant.x
References
i. Stillwell, “Electric Transmission,” 517.
ii. Related to the author by Jack Pfohl, NMP Electric Planner, ca. 1953.
iii. Harold W. Buck, “The Buffalo High-Tension Cable Distribution System,” Transactions of the American Institute of Electrical Engineers, 18, (1901): 836.
iv. Author’s recollection from personal observation during work as NMP Underground Engineer.
v. Editorial Staff of the Edison Electric Institute Transmission and Distribution Committee. Underground Systems Reference Book (New York, NY: Edison Electric Institute,1957), xviii.
vi. Henry Gordon Stott, “The Distribution and Conversion of Received Currents,” Transactions of the American Institute of Electrical Engineers, 18, (1901): 136.
vii. Adams, Niagara Power, 2:7.
viii. Ibid., 287. Stott, “Distribution and Conversion,” 125-152. Stillwell, “Electric Transmission,” 517-522.
ix. Stott, “Distribution and Conversion,” 141-152. Buck, “Buffalo High-Tension,” 835-841. Charles Brand, “History of the 60 Cycle System” (Buffalo General Electric Company, Buffalo, NY, 1922, photocopy).
x. Niagara Mohawk Story, 75.
xi. Buck, “Buffalo High-Tension,” 836. Daniel E. Nye, Electrifying America: Social Meanings of a New Technology, 1880-1940 (Cambridge, Massachusetts: MIT Press, 1992), 41-47. Thomas E. Leary and Elizabeth C. Sholes, Images of America: Buffalo’s Pan-American Exposition. (Charleston, CS: Arcadia Publishing, 1998), 47-60.
- Page created by Cawoody, 8 September 2008
- Contributors: Cawoody x11, Azalma x10, Nbrewer x3, Nmolnar x1, Administrator1 x5, Kwiggins x1
- Last modified by Administrator1, 22 March 2011
<rating comment="false"> Well Written? 1 (No) 2 3 4 5 (Yes) </rating> <rating comment="false"> Informative? 1 (No) 2 3 4 5 (Yes) </rating> <rating comment="false"> Accurate? 1 (No) 2 3 4 5 (Yes) </rating>
