Milestones:Stanford Linear Accelerator Center, 1962: Difference between revisions
(New page: == Stanford Linear Accelerator Center, 1962 == Stanford, CA Dedicated February 1984 - IEEE San Francisco Bay Area Council<br>(ASME National Historic Engineering Landmark, with IEEE) ...) |
No edit summary |
||
| (26 intermediate revisions by 8 users not shown) | |||
| Line 1: | Line 1: | ||
== Stanford Linear Accelerator Center, 1962 == | {{Milestone box | ||
|Date Dedicated=1984/02/01 | |||
|Dedication=4 | |||
|Location=Menlo Park, CA, U.S.A. | |||
|IEEE Regions=6 | |||
|IEEE sections=Santa Clara Valley | |||
|Additional IEEE section information=ASME National Historic Engineering Landmark, jointly designated with IEEE | |||
|Summary=Stanford, Stanford, California, U.S.A. Dedication: February 1984 - IEEE San Francisco Bay Area Council. (ASME National Historic Engineering Landmark, jointly designated with IEEE). The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions. | |||
|Abstract=The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions. | |||
|Special citation=No | |||
}} | |||
== Stanford Linear Accelerator Center, 1962 == | |||
[[image:SLAC-Plaque2.jpg|thumb|Current ASME/IEEE plaque]] | |||
''The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions.'' | [[image:SLAC-Plaque3.jpg|thumb|Earlier plaque]] | ||
[[image:SLAC-Plaque4.jpg|thumb|Earlier plaque (weathered)]] | |||
[[image:SLAC-Plaque1.jpg|thumb|Orientation Theater entry with plaque]] | |||
[[image:SLAC-Sign.png|thumb|SLAC entrance sign]] | |||
[[image:SLAC-SUSB.jpg|thumb|Science and User Support Building (SUSB)]] | |||
[[image:SLAC-AerialView.jpg|thumb|Aerial view of SLAC]] | |||
[[image:SLAC-PortionOfBeamLine.png|thumb|Portion of beam line]] | |||
Stanford, CA Dedicated February 1984 - IEEE San Francisco Bay Area Council<br>([http://www.asme.org/about-asme/history/landmarks ASME National Historic Engineering Landmark], with IEEE) | |||
''The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions.'' | |||
'''The plaque is publicly accessible during free tours with advance registration, and during many public events and lectures. As SLAC is one of 17 National Laboratories, it is subject to Department of Energy site entry and access requirements. See https://www6.slac.stanford.edu/about/visit-slac for visitation information. SLAC is located at 2575 Sand Hill Rd, Menlo Park, CA 94025 USA (GPS: 42.204441, -122.7143259). The plaque is mounted by the entrance to the Orientation Theater, which is located on the first floor of the Science and User Support Building (SUSB) just inside the main gate.''' | |||
The basic research tool at SLAC is an intense beam of electrons that have been accelerated by an electric field equivalent to 30 billion volts, making this the most powerful electron beam in the world. | The basic research tool at SLAC is an intense beam of electrons that have been accelerated by an electric field equivalent to 30 billion volts, making this the most powerful electron beam in the world. | ||
| Line 17: | Line 46: | ||
If any section of the accelerator is out of line, the electromagnetic fields produced in the walls by the passing beam can severely limit the intensity. Controlling this 'beam breakup' effect required precision alignment of the two miles of accelerator. This was solved by mounting four ten-foot accelerator sections on one large aluminum pipe and aligning these four sections with an optical transit in the laboratory. These 40-foot-long sections were then transported into the underground tunnel of the accelerator and connected together. | If any section of the accelerator is out of line, the electromagnetic fields produced in the walls by the passing beam can severely limit the intensity. Controlling this 'beam breakup' effect required precision alignment of the two miles of accelerator. This was solved by mounting four ten-foot accelerator sections on one large aluminum pipe and aligning these four sections with an optical transit in the laboratory. These 40-foot-long sections were then transported into the underground tunnel of the accelerator and connected together. | ||
Fresnel targets, which were built in the end of each 40-foot section, intercepted a laser beam traveling down the center of the pipe. Each 40-foot section was then aligned separately using its own jacking screws. Using this method the accelerator was aligned to be straight within twenty-thousandths of an inch over its two-mile length. | Fresnel targets, which were built in the end of each 40-foot section, intercepted a laser beam traveling down the center of the pipe. Each 40-foot section was then aligned separately using its own jacking screws. Using this method the accelerator was aligned to be straight within twenty-thousandths of an inch over its two-mile length. | ||
== Further Reading == | |||
[https://www.asme.org/about-asme/engineering-history/landmarks/92-stanford-linear-accelerator-center ASME webpage for SLAC National Historic Engineering Landmark] | |||
[https://www.asme.org/wwwasmeorg/media/ResourceFiles/AboutASME/Who%20We%20Are/Engineering%20History/Landmarks/92-Stanford-Linear-Accelerator-Center-1962.pdf 1984 Program for joint dedication by ASME and IEEE, including participating officers on p. 8] | |||
{{Milestone|GeoLoc=37.421012, -122.206082|Description=Stanford, Stanford, California, U.S.A. Dedication: February 1984 - IEEE San Francisco Bay Area Council. (ASME National Historic Engineering Landmark, jointly designated with IEEE). The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions.}} | |||
[[Category:Nuclear_and_plasma_sciences | [[Category:Nuclear_and_plasma_sciences]] | ||
[[Category: | [[Category:Particle_accelerators]] | ||
[[Category: | [[Category:Particles]] | ||
Latest revision as of 20:21, 9 January 2024
- Date Dedicated
- 1984/02/01
- Dedication #
- 4
- Location
- Menlo Park, CA, U.S.A.
- IEEE Regions
- 6
- IEEE sections
- Santa Clara Valley
- Additional IEEE section information
- ASME National Historic Engineering Landmark, jointly designated with IEEE
- Achievement date range
- 1962
Stanford Linear Accelerator Center, 1962
Stanford, CA Dedicated February 1984 - IEEE San Francisco Bay Area Council
(ASME National Historic Engineering Landmark, with IEEE)
The Stanford two-mile accelerator, the longest in the world, accelerates electrons to the very high energy needed in the study of subatomic particles and forces. Experiments performed here have shown that the proton, one of the building blocks of the atom, is in turn composed of smaller particles now called quarks. Other research here has uncovered new families of particles and demonstrated subtle effects of the weak nuclear force. This research requires the utmost precision in the large and unique electromechanical devices and systems that accelerate, define, deliver and store the beams of particles, and in the detectors that analyze the results of the particle interactions.
The plaque is publicly accessible during free tours with advance registration, and during many public events and lectures. As SLAC is one of 17 National Laboratories, it is subject to Department of Energy site entry and access requirements. See https://www6.slac.stanford.edu/about/visit-slac for visitation information. SLAC is located at 2575 Sand Hill Rd, Menlo Park, CA 94025 USA (GPS: 42.204441, -122.7143259). The plaque is mounted by the entrance to the Orientation Theater, which is located on the first floor of the Science and User Support Building (SUSB) just inside the main gate.
The basic research tool at SLAC is an intense beam of electrons that have been accelerated by an electric field equivalent to 30 billion volts, making this the most powerful electron beam in the world.
The two-mile linear accelerator produces this field using high-power microwaves traveling through an evacuated waveguide. Electrons injected into one end of this pipe are continuously accelerated by this traveling field to very high energies.
Although the principle is straightforward, the application is not. The engineering problems included manufacturing a thousand sections of precision copper waveguide, aligning these sections over a two-mile length, producing high-power pulsed microwaves, and safely handling the intense high-energy beam of electrons.
The accelerating waveguide, which is basically a long conducting tube about four inches in diameter, was assembled from cylinders and disks that formed individual microwave cavities as shown in the photograph at right.
These cavities, made of high-purity copper, were machined to a precision of about two ten-thousandths of an inch and then brazed in a hydrogen furnace into ten-foot-long sections. Each cavity was then 'tuned' by slightly deforming the outside using hydraulic rams. In the complete accelerator there are nearly 100,000 of these cavities, each brazed to hold high vacuum. This operation required new techniques for mass production to very high standards.
If any section of the accelerator is out of line, the electromagnetic fields produced in the walls by the passing beam can severely limit the intensity. Controlling this 'beam breakup' effect required precision alignment of the two miles of accelerator. This was solved by mounting four ten-foot accelerator sections on one large aluminum pipe and aligning these four sections with an optical transit in the laboratory. These 40-foot-long sections were then transported into the underground tunnel of the accelerator and connected together.
Fresnel targets, which were built in the end of each 40-foot section, intercepted a laser beam traveling down the center of the pipe. Each 40-foot section was then aligned separately using its own jacking screws. Using this method the accelerator was aligned to be straight within twenty-thousandths of an inch over its two-mile length.
Further Reading
ASME webpage for SLAC National Historic Engineering Landmark
1984 Program for joint dedication by ASME and IEEE, including participating officers on p. 8
