Milestones:Plaque mounting details

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Milestone plaque mounting details

The milestone plaques come with six mounting holes in the back. There are four at the corners: 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) or 1.95 inches/4.596cm in from the edges.

There are also two holes along the mildline (6 inches/15.24cm) of the plaque. They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.

Below is a rough diagram of the plaque as seen from the back.