IEEE
You are not logged in, please sign in to edit > Log in / create account  

Milestones:Plaque mounting details

From GHN

(Difference between revisions)
Jump to: navigation, search
Line 5: Line 5:
 
There are also two holes along the mildline (6 inches/15.24cm) of the plaque.  They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.  
 
There are also two holes along the mildline (6 inches/15.24cm) of the plaque.  They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.  
  
 +
<br>
  
 +
We recommend waiting until you have the actual plaques in hand before drilling any mounting holes or preparing the masonry.
  
We recommend waiting until you have the actual plaques in hand before drilling any mounting holes or preparing the masonry.
+
<br>
 
+
 
+
  
 
Below is a rough diagram of the plaque as seen from the back.&nbsp;  
 
Below is a rough diagram of the plaque as seen from the back.&nbsp;  
Line 15: Line 15:
 
[[Image:Resized milestone plaque diagram.jpg|Image:Resized_milestone_plaque_diagram.jpg]]  
 
[[Image:Resized milestone plaque diagram.jpg|Image:Resized_milestone_plaque_diagram.jpg]]  
  
[[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]]
+
[[Category:IEEE|{{PAGENAME}}]] [[Category:History_&_heritage|{{PAGENAME}}]]&nbsp;<span id="fck_dom_range_temp_1293546085986_811"></span><span id="fck_dom_range_temp_1293546085986_197"></span><span id="fck_dom_range_temp_1293546085986_975"></span><span id="fck_dom_range_temp_1293546085986_733"></span>
 +
 
 +
Back to: [[Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone|Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone]]

Revision as of 14:21, 28 December 2010

Milestone plaque mounting details

The milestone plaques come with six mounting holes in the back. There are four at the corners: 2.75 inches/6.5 cm in from the corners (as measured on the diagonal) or 1.95 inches/4.596cm in from the edges. 

There are also two holes along the mildline (6 inches/15.24cm) of the plaque.  They are 4 inches/10.16 cm in from the side edges (or 5 inches/12.7cm from the center) and 6 inches/15.24cm from the bottom and top edges. The plaques come with six threaded bolts ½ cm in diameter and 5 cm long.


We recommend waiting until you have the actual plaques in hand before drilling any mounting holes or preparing the masonry.


Below is a rough diagram of the plaque as seen from the back. 

Image:Resized_milestone_plaque_diagram.jpg 

Back to: Milestones:Milestone_Guidelines_and_How_to_Propose_a_Milestone