IEEE
You are not logged in, please sign in to edit > Log in / create account  

Milestone-Proposal:Mainline Electrification of the Baltimore and Ohio Railroad, 1895

From GHN

(Difference between revisions)
Jump to: navigation, search
(Article updated via HTTP request)
(Article updated via HTTP request)
Line 1: Line 1:
{{ProposalEdit|a1=Mainline Electrification of the Baltimore and Ohio Railroad, 1895|a2a=The Milestone achievement took place in the City of Baltimore, MD.|a2b=The Milestone resides in the IEEE Baltimore Section.|a3=The design and construction work took place in the period leading up to 27 June 1895 when the mainline electrificaiton first went into service.  It remained in service until 1952.|a4=The Baltimore & Ohio Belt Railway electrification marked the first time that electric propulsion was applied to mainline freight and passenger operation. Smoke free propulsion was mandated by local ordinance which forbade smoke flues or vents in the Howard Street Tunnel that passed under a fashionable area of Baltimore. An electric locomotive provided the sole propulsion to a train that consisted of standard passenger and freight rail cars plus an idle steam locomotive.|a5=All prior application of electric power to rail operation involved the use of street railways, elevated lines (Chicago), subways (London), or was limited to the movement of freight cars at slow speeds over street railway or privately-owned spur trackage to industrial plants located thereon.|a6=The technical challenges were two fold. First, movement of mainline trains at normal speeds required the design and construction of a locomotive with 1,000% greater power than any constructed previously. Second, the provision of adequate propulsion power required concentrated power generation that exceeded the total capacity of utilities such as the Edison Electric Illuminating Co. of NY which comprised five stations. The required locomotive performance was achieved with a scheme that coupled large motors to the wheels by a steel "spider," the arms of which were fitted with rubber blocks that engaged the spokes of the driving wheels. Power was provided by large (for that time) 500-kW compound dynamos connected to permit a voltage increase of as much as 25% to meet peak demand. In view of the unprecedented high current involved, power distribution initially used a steel overhead contact system. Likewise, the integrity of return current conduction was assured as the usual running rail path was supplemented with a bonded cable to mitigate possible stray current issues.|a7=The Howard Street Tunnel still exists but is not suitable for the location of the Milestone plaque.  The intended site for the plaque is the B&O Railroad Museum, located at Pratt and Poppleton Streets (901 West Pratt Street), Baltimore, MD 21223. the Museum is on the site of the historic Mt. Clare shops, considered by many to be the birthplace of American railroading.  The Museum is comprised of five historic buildings located on approximately 40 acres and houses one of the world's finest and most comprehensive collections of railroad locomotives, rolling stock, and other artifacts. The Museum has been granted National Historic Landmark status by the U.S. Deartment of the Interior. The Museum's centerpiece building is the original B&O roundhouse built in 1884 and in continuous railroad use until 1953. Courtney Wilson, the Museum's executive director, has indicated that the Museum would be honored to be the location of the plaque.|a8=Yes|a9=The approximately 40-acre site is appropriately fenced and is a secure site. It is accessible to all members of the public who visit the museum. The proposed specific location of the plaque is at the Education Station building on the site. this location is the centralized repository for other plaques acquired through the years. The GPS coordinates of the proposed site of the plaque are: (39 deg.17'07.81"N),(76 deg.38'00.43"W).|a10=In 1990, the Baltimore and Ohio Railroad Museum became an independent nonprofit education institution controlled by a board of directors.|a11=Yes|a12=The IEEE Baltimore Section has agreed to sponsor the Milestone nomination.  The 2011 Section Chair is Alan Pressman whose email adddress is: alan.pressman@constellation.com|a13name=Alan Pressman|a13section=Baltimore Section|a13position=2011 Section Chair|a13email=alan.pressman@constellation.com|a14name=Anna Romaniuk|a14ou=Baltimore Section|a14position=Milestone Nominating Committee Chair and Immediate Past Section Chair|a14email=aromaniuk@ieee.org|a15Aname=Anna Romaniuk|a15Aemail=aromaniuk@ieee.org|a15Aname2=Joseph Cunningham|a15Aemail2=joec20@earthlink.net|a15Bname=Anna Romaniuk|a15Bemail=aromaniuk@ieee.org|a15Bname2=|a15Bemail2=|a15Cname=Anna Romaniuk|a15Ctitle=Milestone Nominating Committee Chair and Immediate Past Section Chair|a15Corg=IEEE Baltimore Section|a15Caddress=114 West Fort Avenue, Baltimore, MD 21230|a15Cphone=(443) 708-1036|a15Cemail=aromaniuk@ieee.org}}<br />[[Media:Mapfloorplan-1-.jpg|Mapfloorplan-1-.jpg]]
+
{{Proposal|a1=Mainline Electrification of the Baltimore and Ohio Railroad, 1895|a2a=The Milestone achievement took place in the City of Baltimore, MD.|a2b=The Milestone resides in the IEEE Baltimore Section.|a3=The design and construction work took place in the period leading up to 27 June 1895 when the mainline electrificaiton first went into service.  It remained in service until 1952.|a4=The Baltimore & Ohio Belt Railway electrification marked the first time that electric propulsion was applied to mainline freight and passenger operation. Smoke free propulsion was mandated by local ordinance which forbade smoke flues or vents in the Howard Street Tunnel that passed under a fashionable area of Baltimore. An electric locomotive provided the sole propulsion to a train that consisted of standard passenger and freight rail cars plus an idle steam locomotive.|a5=All prior application of electric power to rail operation involved the use of street railways, elevated lines (Chicago), subways (London), or was limited to the movement of freight cars at slow speeds over street railway or privately-owned spur trackage to industrial plants located thereon.|a6=The technical challenges were two fold. First, movement of mainline trains at normal speeds required the design and construction of a locomotive with 1,000% greater power than any constructed previously. Second, the provision of adequate propulsion power required concentrated power generation that exceeded the total capacity of utilities such as the Edison Electric Illuminating Co. of NY which comprised five stations. The required locomotive performance was achieved with a scheme that coupled large motors to the wheels by a steel "spider," the arms of which were fitted with rubber blocks that engaged the spokes of the driving wheels. Power was provided by large (for that time) 500-kW compound dynamos connected to permit a voltage increase of as much as 25% to meet peak demand. In view of the unprecedented high current involved, power distribution initially used a steel overhead contact system. Likewise, the integrity of return current conduction was assured as the usual running rail path was supplemented with a bonded cable to mitigate possible stray current issues.|a7=The Howard Street Tunnel still exists but is not suitable for the location of the Milestone plaque.  The intended site for the plaque is the B&O Railroad Museum, located at Pratt and Poppleton Streets (901 West Pratt Street), Baltimore, MD 21223. the Museum is on the site of the historic Mt. Clare shops, considered by many to be the birthplace of American railroading.  The Museum is comprised of five historic buildings located on approximately 40 acres and houses one of the world's finest and most comprehensive collections of railroad locomotives, rolling stock, and other artifacts. The Museum has been granted National Historic Landmark status by the U.S. Deartment of the Interior. The Museum's centerpiece building is the original B&O roundhouse built in 1884 and in continuous railroad use until 1953. Courtney Wilson, the Museum's executive director, has indicated that the Museum would be honored to be the location of the plaque.|a8=Yes|a9=The approximately 40-acre site is appropriately fenced and is a secure site. It is accessible to all members of the public who visit the museum. The proposed specific location of the plaque is at the Education Station building on the site. this location is the centralized repository for other plaques acquired through the years. The GPS coordinates of the proposed site of the plaque are: (39 deg.17'07.81"N),(76 deg.38'00.43"W).|a10=In 1990, the Baltimore and Ohio Railroad Museum became an independent nonprofit education institution controlled by a board of directors.|a11=Yes|a12=The IEEE Baltimore Section has agreed to sponsor the Milestone nomination.  The 2011 Section Chair is Alan Pressman whose email adddress is: alan.pressman@constellation.com|a13name=Alan Pressman|a13section=Baltimore Section|a13position=2011 Section Chair|a13email=alan.pressman@constellation.com|a14name=Anna Romaniuk|a14ou=Baltimore Section|a14position=Milestone Nominating Committee Chair and Immediate Past Section Chair|a14email=aromaniuk@ieee.org|a15Aname=Anna Romaniuk|a15Aemail=aromaniuk@ieee.org|a15Aname2=Joseph Cunningham|a15Aemail2=joec20@earthlink.net|a15Bname=Anna Romaniuk|a15Bemail=aromaniuk@ieee.org|a15Bname2=|a15Bemail2=|a15Cname=Anna Romaniuk|a15Ctitle=Milestone Nominating Committee Chair and Immediate Past Section Chair|a15Corg=IEEE Baltimore Section|a15Caddress=114 West Fort Avenue, Baltimore, MD 21230|a15Cphone=(443) 708-1036|a15Cemail=aromaniuk@ieee.org}}

Revision as of 02:04, 3 February 2011

Docket #:

This Proposal has been approved, and is now a Milestone Nomination

This is a draft proposal, that has not yet been submitted. To submit this proposal, click on "Edit with form", check the "Submit this proposal for review" box at the bottom, and save the page.


Is the achievement you are proposing more than 25 years old?


Is the achievement you are proposing within IEEE’s fields of interest? (e.g. “the theory and practice of electrical, electronics, communications and computer engineering, as well as computer science, the allied branches of engineering and the related arts and sciences” – from the IEEE Constitution)


Did the achievement provide a meaningful benefit for humanity?


Was it of at least regional importance?


Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)?


Has an IEEE Organizational Unit agreed to arrange the dedication ceremony?


Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated?


Has the owner of the site agreed to have it designated as an Electrical Engineering Milestone? Yes


Year or range of years in which the achievement occurred:

The design and construction work took place in the period leading up to 27 June 1895 when the mainline electrificaiton first went into service. It remained in service until 1952.

Title of the proposed milestone:

Mainline Electrification of the Baltimore and Ohio Railroad, 1895

Plaque citation summarizing the achievement and its significance:


In what IEEE section(s) does it reside?

The Milestone resides in the IEEE Baltimore Section.

IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:

IEEE Organizational Unit(s) paying for milestone plaque(s):


IEEE Organizational Unit(s) arranging the dedication ceremony:


IEEE section(s) monitoring the plaque(s):


Milestone proposer(s):


Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.

Street address(es) and GPS coordinates of the intended milestone plaque site(s):

The Milestone achievement took place in the City of Baltimore, MD.

Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.

Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need.

The Howard Street Tunnel still exists but is not suitable for the location of the Milestone plaque. The intended site for the plaque is the B&O Railroad Museum, located at Pratt and Poppleton Streets (901 West Pratt Street), Baltimore, MD 21223. the Museum is on the site of the historic Mt. Clare shops, considered by many to be the birthplace of American railroading. The Museum is comprised of five historic buildings located on approximately 40 acres and houses one of the world's finest and most comprehensive collections of railroad locomotives, rolling stock, and other artifacts. The Museum has been granted National Historic Landmark status by the U.S. Deartment of the Interior. The Museum's centerpiece building is the original B&O roundhouse built in 1884 and in continuous railroad use until 1953. Courtney Wilson, the Museum's executive director, has indicated that the Museum would be honored to be the location of the plaque.

Are the original buildings extant?

Yes

Details of the plaque mounting:


How is the site protected/secured, and in what ways is it accessible to the public?

The approximately 40-acre site is appropriately fenced and is a secure site. It is accessible to all members of the public who visit the museum. The proposed specific location of the plaque is at the Education Station building on the site. this location is the centralized repository for other plaques acquired through the years. The GPS coordinates of the proposed site of the plaque are: (39 deg.17'07.81"N),(76 deg.38'00.43"W).

Who is the present owner of the site(s)?

In 1990, the Baltimore and Ohio Railroad Museum became an independent nonprofit education institution controlled by a board of directors.

A letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property:


A letter or email from the appropriate Section Chair supporting the Milestone application:


What is the historical significance of the work (its technological, scientific, or social importance)?

The Baltimore & Ohio Belt Railway electrification marked the first time that electric propulsion was applied to mainline freight and passenger operation. Smoke free propulsion was mandated by local ordinance which forbade smoke flues or vents in the Howard Street Tunnel that passed under a fashionable area of Baltimore. An electric locomotive provided the sole propulsion to a train that consisted of standard passenger and freight rail cars plus an idle steam locomotive.

What obstacles (technical, political, geographic) needed to be overcome?

The technical challenges were two fold. First, movement of mainline trains at normal speeds required the design and construction of a locomotive with 1,000% greater power than any constructed previously. Second, the provision of adequate propulsion power required concentrated power generation that exceeded the total capacity of utilities such as the Edison Electric Illuminating Co. of NY which comprised five stations. The required locomotive performance was achieved with a scheme that coupled large motors to the wheels by a steel "spider," the arms of which were fitted with rubber blocks that engaged the spokes of the driving wheels. Power was provided by large (for that time) 500-kW compound dynamos connected to permit a voltage increase of as much as 25% to meet peak demand. In view of the unprecedented high current involved, power distribution initially used a steel overhead contact system. Likewise, the integrity of return current conduction was assured as the usual running rail path was supplemented with a bonded cable to mitigate possible stray current issues.

What features set this work apart from similar achievements?

All prior application of electric power to rail operation involved the use of street railways, elevated lines (Chicago), subways (London), or was limited to the movement of freight cars at slow speeds over street railway or privately-owned spur trackage to industrial plants located thereon.

References to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or citations to pages in scholarly books. At least one of the references must be from a scholarly book or journal article.


Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to ieee-history@ieee.org. Please see the Milestone Program Guidelines for more information.