Milestone-Proposal:Harvard Mark 1 Computer, 1944 - 1959
Docket #:2013-09
This proposal has been submitted for review.
Is the achievement you are proposing more than 25 years old? Yes
Is the achievement you are proposing within IEEE’s fields of interest? (e.g. “the theory and practice of electrical, electronics, communications and computer engineering, as well as computer science, the allied branches of engineering and the related arts and sciences” – from the IEEE Constitution) Yes
Did the achievement provide a meaningful benefit for humanity? Yes
Was it of at least regional importance? Yes
Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)? Yes
Has an IEEE Organizational Unit agreed to arrange the dedication ceremony? Yes
Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated? Yes
Has the owner of the site agreed to have it designated as an Electrical Engineering Milestone? Yes
Year or range of years in which the achievement occurred:
Operating 1944 to 1959
Title of the proposed milestone:
Harvard Mark 1 Computer
Plaque citation summarizing the achievement and its significance:
The Mark I computer was a general-purpose electro-mechanical computer that could execute long computations automatically. Conceived by Harvard University's Dr. Howard Aiken, the Mark I was built by International Business Machines Corporation in New York. The machine used mechanical punch-card tabulating equipment. Considered the first large-scale electro-mechanical computer, it represented a leap forward in modern computing. Grace Hopper began her career as a programmer on Mark I.
In what IEEE section(s) does it reside?
Boston
IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:
IEEE Organizational Unit(s) paying for milestone plaque(s):
Unit: Boston Section
Senior Officer Name: Senior officer name masked to public
IEEE Organizational Unit(s) arranging the dedication ceremony:
Unit: Boston Section
Senior Officer Name: Senior officer name masked to public
IEEE section(s) monitoring the plaque(s):
IEEE Section: Boston Section
IEEE Section Chair name: Section chair name masked to public
Milestone proposer(s):
Proposer name: Proposer's name masked to public
Proposer email: Proposer's email masked to public
Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.
Street address(es) and GPS coordinates of the intended milestone plaque site(s):
Harvard School of Engineering and Applied Science, 1 Oxford Street Cambridge MA 02138
Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.
Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need.
The Mark I was eventually disassembled, although portions of it remain at Harvard in the Science Center. It is part of the Harvard Collection of Historical Scientific Instruments. The milestone plaque will be mounted adjacent remaining apparatus on display.
Are the original buildings extant?
Yes
Details of the plaque mounting:
Inside the lobby of Harvard Science Center (1 Oxford Street), Cambridge MA, in proximity to the historical display that features significant components from the original Mark I.
How is the site protected/secured, and in what ways is it accessible to the public?
The Harvard school lobby is generally opened to the public.
Who is the present owner of the site(s)?
Harvard School of Engineering and Applied Science
A letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property:
File:Dean Murray Harvard IEEE Mark 1.pdf
A letter or email from the appropriate Section Chair supporting the Milestone application:
File:Boston Section memo re milestones .pdf
What is the historical significance of the work (its technological, scientific, or social importance)?
The IEEE should award this milestone to the Mark 1 Computer, the name used by the Operator, Harvard University, Howard Aiken, Grace Hooper,and others for nearly 15 years. The designation preferred by IBM was 'IBM Automatic Sequence Controlled Calculator (ASCC)' which should be considered a temporary or shop name. Since the computing machine was the brainchild of Howard Aiken, naming rights belong to him.
. for business as it was named by the owner/operator, not the name given to the machine by IBM by its Milestone the innovator, the entrepreneur, the driving force behind the Mark I, that is Howard Aiken. Not IBM. As collaborator, builder, financier, IBM played an important role in the development of Mark I. IBM was just the brides mate, never the bride in this project. The name Harvard Mark I computer is preferrfed to the name given by its maker, IBM Wikipedia
http://en.wikipedia.org/wiki/Harvard_Mark_I
The IBM Automatic Sequence Controlled Calculator (ASCC), called the Mark I by Harvard University,[1] was an electro-mechanical computer. The electromechanical ASCC was devised by Howard H. Aiken, built at IBM and shipped to Harvard in February 1944. It began computations for the U.S. Navy Bureau of Ships in May and was officially presented to the university on August 7, 1944.
The Automatic Sequence Controlled Calculator (Harvard Mark I) was the first operating machine that could execute long computations automatically. A project conceived by Harvard University's Dr. Howard Aiken, the Mark I was built by IBM engineers in Endicott, N.Y. A steel frame 51 feet (16 m) long and eight feet high held the calculator, which consisted of an interlocking panel of small gears, counters, switches and control circuits, all only a few inches in depth. The ASCC used 500 miles (800 km) of wire with three million connections, 3,500 multipole relays with 35,000 contacts, 2,225 counters, 1,464 tenpole switches and tiers of 72 adding machines, each with 23 significant numbers. It was the industry's largest electromechanical calculator.[2]
What obstacles (technical, political, geographic) needed to be overcome?
Biographer Cohen recounts how Aiken was driven by a vision of designing and building a very large calculating machine. He was rejected twice but he persisted. Eventually he succeeded. Wikipedia writes "The original concept was presented to IBM by Howard Aiken in November 1937.[2] After a feasibility study by IBM's engineers, Thomas Watson Sr. personally approved the project and its funding in February 1939. Howard Aiken had started to look for a company to design and build his calculator in early 1937."
What features set this work apart from similar achievements?
Technical features are stated on the GHN and other websites listed below.
References to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or citations to pages in scholarly books. At least one of the references must be from a scholarly book or journal article.
1 IEEE GHN Biography of Howard Aiken,
http://www.ieeeghn.org/wiki/index.php/Howard_Aiken
2 IEEE GHN Harvard Mark I http ..... LATER
3 Wikipedia http://en.wikipedia.org/wiki/Harvard_Mark_I
4 Cohen, Bernard (2000). Howard Aiken, Portrait of a computer pioneer. Cambridge, Massachusetts: The MIT Press.
5 Aiken, Howard H. and Grace M. Hopper, "The Automatic Sequence Controlled Calculator", Electrical Engineering, Vol.65 No.8-9, pp.384-391 (Aug 1946); No.10, pp.449-454 (Oct 1946); No.11, pp.522-528 (Nov 1946).
6 Harvard Computation Laboratory, A Manual of Operation for the Automatic Sequence Controlled Calculator, The Annals of the Computation Laboratory of Harvard University, Vol.1, Harvard University Press (1946), 561pp.
Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to ieee-history@ieee.org. Please see the Milestone Program Guidelines for more information.
Photographs and information on IBM's collaboration can be found on Frank da Cruz website: http://www.columbia.edu/cu/computinghistory/mark1.html - sources
A priceless image of the team working on Mark I was captured from www. britannica.com
NATHAN PLEASE CORRECT GRACE HOOPER NAME TO HOPPER!!#@$@$%
Grace Murray Hopper (seated second from right) and Howard Aiken (seated center) along with other members of the Bureau of Ordinance Project. Photo taken in front of Mark !.
Mark 1 computer group team.png
Dean Murray Harvard IEEE Mark 1.pdf
