Milestone-Proposal:ASCII MIlestone - IEEE NJ Coast Section

The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

Docket #:

This is a draft proposal, that has not yet been submitted. To submit this proposal, click on "Edit with form", check the "Submit this proposal for review" box at the bottom, and save the page.

Is the achievement you are proposing more than 25 years old? Yes

Is the achievement you are proposing within IEEE’s fields of interest? (e.g. “the theory and practice of electrical, electronics, communications and computer engineering, as well as computer science, the allied branches of engineering and the related arts and sciences” – from the IEEE Constitution) Yes

Did the achievement provide a meaningful benefit for humanity? Yes

Was it of at least regional importance? Yes

Has an IEEE Organizational Unit agreed to pay for the milestone plaque(s)? Yes

Has an IEEE Organizational Unit agreed to arrange the dedication ceremony? Yes

Has the IEEE Section in which the milestone is located agreed to take responsibility for the plaque after it is dedicated? Yes

Has the owner of the site agreed to have it designated as an Electrical Engineering Milestone? Yes

Year or range of years in which the achievement occurred:

1963

Title of the proposed milestone:

American Standard Code for Information Interchange (ASCII) - 1963

Plaque citation summarizing the achievement and its significance:

ASCII is a character-encoding scheme originally based on the English alphabet. Most modern character-encoding schemes are based on ASCII, though they support additional characters. Work on ASCII standard began with the first meeting of the American Standards Association (ASA) X3.2 subcommittee and the first edition of the standard was published during 1963.

In what IEEE section(s) does it reside?

IEEE NJ Coast Section

IEEE Organizational Unit(s) which have agreed to sponsor the Milestone:

IEEE Organizational Unit(s) paying for milestone plaque(s):

Unit: IEEE NJ Coast Section
Senior Officer Name: Senior officer name masked to public

IEEE Organizational Unit(s) arranging the dedication ceremony:

Unit: IEEE NJ Coast Section
Senior Officer Name: Senior officer name masked to public

IEEE section(s) monitoring the plaque(s):

IEEE Section: IEEE NJ Coast Section
IEEE Section Chair name: Section chair name masked to public

Milestone proposer(s):

Proposer name: Proposer's name masked to public
Proposer email: Proposer's email masked to public

Please note: your email address and contact information will be masked on the website for privacy reasons. Only IEEE History Center Staff will be able to view the email address.

Street address(es) and GPS coordinates of the intended milestone plaque site(s):

AT&T Labs 200 S Laurel Ave Middletown, NJ 07748

GPS coordinates:

Latitude and Longitude (Decimal) Latitude and Longitude (ddd.mm.ss) Latitude: 40.3973552 Latitude: N 40° 23′ 50.48″ Longitude: -74.1356959 Longitude: W 74° 8′ 8.51″

Describe briefly the intended site(s) of the milestone plaque(s). The intended site(s) must have a direct connection with the achievement (e.g. where developed, invented, tested, demonstrated, installed, or operated, etc.). A museum where a device or example of the technology is displayed, or the university where the inventor studied, are not, in themselves, sufficient connection for a milestone plaque.

Please give the address(es) of the plaque site(s) (GPS coordinates if you have them). Also please give the details of the mounting, i.e. on the outside of the building, in the ground floor entrance hall, on a plinth on the grounds, etc. If visitors to the plaque site will need to go through security, or make an appointment, please give the contact information visitors will need.

The site is the place where it was invented and first used. This is the AT&T Labs Building.

There is Alexander Graham Bell torso right in the vicinity of where we plan to install the plaque

Are the original buildings extant?

YES, this building is current operational and used as labs facility housing nearly 5000 employees.

Details of the plaque mounting:

Ground Floor Entrance Hall Lobby

How is the site protected/secured, and in what ways is it accessible to the public?

The site is within the security perimeter of the AT&T.

Yes, visitors will have to sign in at the front desk of the facility.

Who is the present owner of the site(s)?

AT&T

A letter in English, or with English translation, from the site owner(s) giving permission to place IEEE milestone plaque on the property:

A letter or email from the appropriate Section Chair supporting the Milestone application:

What is the historical significance of the work (its technological, scientific, or social importance)?

What obstacles (technical, political, geographic) needed to be overcome?

What features set this work apart from similar achievements?

References to establish the dates, location, and importance of the achievement: Minimum of five (5), but as many as needed to support the milestone, such as patents, contemporary newspaper articles, journal articles, or citations to pages in scholarly books. At least one of the references must be from a scholarly book or journal article.

Supporting materials (supported formats: GIF, JPEG, PNG, PDF, DOC): All supporting materials must be in English, or if not in English, accompanied by an English translation. You must supply the texts or excerpts themselves, not just the references. For documents that are copyright-encumbered, or which you do not have rights to post, email the documents themselves to ieee-history@ieee.org. Please see the Milestone Program Guidelines for more information.