Early Electrification of Buffalo: 60-Hz Replaces 25-Hz
This brings us up to 1930 when another great event took place, the start of the 60-Hz system in Western New York and the conversion from 25-Hz to 60-Hz. As outlined below, the conversion in Buffalo took 76 years [Fig 12.1]. (Refer to the two-part article '25-Hz at Niagara Falls - end of an era on the Niagara Frontier' in the Jan/Feb and Mar/Apr 2008 issues of IEEE Power& Energy magazine; author’s recollections.)
1947 - The beginning of end of the 25-Hz system when the company announced no new 25-hz customers Fig. 12.2]. In 1949 the last arc lights were discontinued. They were on Main Street in downtown Buffalo.i
1952 - Western Division 60-Hz peak load exceeded the 25-Hz peak load [Fig12.3]. In 1956 the Buffalo downtown dc Edison System was shut down.
1956 - Schoellkopf disaster which destroyed Stations 3B and 3C [Fig. 12.4]. 25 Hz was still available from other sources but at a higher cost. In the 1960’s the Shredded Wheat Company in Niagara Falls was the last two-phase four-wire customer.
1998 - New York Public service Commission approves the elimination of the 25-Hz system by December 31, 2007 [Fig. 12.5]. Customer contributions were required if repairs exceed $25,000. In 2002 the company initiated an incentive program that provided a limited matching grant to retrofit customer equipment for 60-Hz operation
2006 - On October 12 at 8:53 pm, 66-kV transmission conductors came down during the ‘October Surprise’ snow storm. The five remaining customers elected not to contribute to the cost of repairs. Thus ended almost 110 years of 25-Hz service in Buffalo.
Next: Contributions of Five AIEE Presidents
i. Related to the author by Jack Pfohl NMP Electric Planner, ca. 1953. ==
- Page created by Cawoody, 8 September 2008
- Contributors: Cawoody x9, Azalma x4, Nbrewer x3, Nmolnar x1, Administrator1 x6, Kwiggins x1
- Last modified by Administrator1, 22 July 2014